Process parameters optimization for maximizing tensile strength in friction stir-welded carbon steel

Bhatia, Anmol (avtor), Wattal, Reeta (avtor)

The present study focuses on improving the ultimate tensile strength of friction stir welded carbon steel (AISI 1018). The effect of the process parameters (welding speed, tool RPM, and shoulder diameter) on the response parameters (ultimate tensile strength, percentage elongation and percentage reduction in area) were studied. Response surface methodology was used to develop the mathematical model for response parameters, and the adequacy of the model was checked using analysis of variance (ANOVA). The welding speed and tool RPM were found to affect the ultimate tensile strength significantly. The percentage elongation was affected only by welding speed. The percentage reduction in the area was affected by welding speed and shoulder diameter. The microstructure and microhardness of the weld have been studied and reported in the study.

• Jezik: Angleški jezik
• Ključne besede: friction stir welding, steel, ANOVA, response surface methodology, ultimate tensile strength, microstructure, microhardness
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.01 - Izvirni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2021
• Št. strani: Str. 311-321
• Številčenje: Vol. 67, no. 6
• PID: 20.500.12556/RUL-128362
• UDK: 621.791
• ISSN pri članku: 0039-2480
• DOI: 10.5545/sv-jme.2021.7203
• COBISS.SI-ID: 69842435
• Datum objave v RUL: 09.07.2021

BHATIA, Anmol in WATTAL, Reeta, 2021, Process parameters optimization for maximizing tensile strength in friction stir-welded carbon steel. Strojniški vestnik [na spletu]. 2021. Vol. 67, no. 6, p. 311–321. [Dostopano 31 marec 2025]. DOI 10.5545/sv-jme.2021.7203. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=128362

Gradivo je del revije

• Naslov: Strojniški vestnik
• Skrajšan naslov: Stroj. vestn.
• Založnik: Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
• ISSN: 0039-2480
• COBISS.SI-ID: 762116

Sekundarni jezik

• Jezik: Slovenski jezik
• Naslov: Optimizacija parametrov procesa za povečanje natezne trdnosti ogljikovega jekla, torno varjenega z gnetenjem
• Ključne besede: torno varjenje z gnetenjem, jeklo, ANOVA, metoda odzivnih površin, porušitvena natezna trdnost, morfologija loma, mikrostruktura, mikrotrdota