izpis_h1_title_alt

Minimization of the lifecycle cost of a rotary heat exchanger used in building ventilation systems in cold climates
ID Sokolnikas, Ignas (Avtor), ID Čiuprinskas, Kęstutis (Avtor), ID Čiuprinskiene, Jolanta (Avtor)

URLURL - Izvorni URL, za dostop obiščite https://www.sv-jme.eu/sl/article/minimisation-of-the-life-cycle-cost-of-a-rotary-heat-exchanger-used-in-building-ventilation-systems-in-cold-climates/ Povezava se odpre v novem oknu
.pdfPDF - Predstavitvena datoteka, prenos (946,51 KB)
MD5: 65794EB8DAB99A853557F9784A25511B

Izvleček
This article presents an analysis of rotary heat exchangers (RHE) used as heat recovery units in building ventilation systems in cold climates. Usually, heat exchangers with the highest heat transfer efficiency are the preferable option for this purpose. However, such exchangers usually have the highest media pressure drop, thus requiring the highest amount of energy for media transportation. In this study, the problem is solved by analysing the lifecycle cost (LCC) of the RHE including both the recovered heat and the electricity consumed in the fans of the air handling unit (AHU). The purpose of the investigation was to determine the optimal set of geometrical characteristics such as the exchanger%s length, foil thickness, the height and width of the air channel. Two hundred and seventy different combinations were examined using analytical dependencies and ANSYS simulations. The results are compared with experimental data obtained earlier at the KOMFOVENT laboratory. The results show that the best overall energy efficiency is obtained in heat exchangers that do not offer the best heat recovery efficiency, and LCC differences in the same climatic and economic conditions can go as high as 31 %, mainly due to the geometrical parameters of the heat exchanger.

Jezik:Angleški jezik
Ključne besede:rotary heat exchangers, heat recovery, ventilation systems, temperature efficiency, pressure loss, ANSYS, lifecycle cost
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2021
Št. strani:Str. 302-310
Številčenje:Vol. 67, no. 6
PID:20.500.12556/RUL-128361 Povezava se odpre v novem oknu
UDK:628.8
ISSN pri članku:0039-2480
DOI:10.5545/sv-jme.2021.7168 Povezava se odpre v novem oknu
COBISS.SI-ID:69792259 Povezava se odpre v novem oknu
Datum objave v RUL:09.07.2021
Število ogledov:775
Število prenosov:151
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Strojniški vestnik
Skrajšan naslov:Stroj. vestn.
Založnik:Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
ISSN:0039-2480
COBISS.SI-ID:762116 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Slovenski jezik
Naslov:Minimizacija stroškov življenjskega cikla rotacijskih prenosnikov toplote za stavbne prezračevalne sisteme v hladnih podnebjih
Ključne besede:rotacijski prenosniki toplote, rekuperacija toplote, prezračevalni sistemi, temperaturni izkoristek, tlačni padec, ANSYS, stroški življenjskega cikla

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj