izpis_h1_title_alt

Interactions of coating and wood flooring surface system properties
ID Pavlič, Matjaž (Avtor), ID Petrič, Marko (Avtor), ID Žigon, Jure (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (622,22 KB)
MD5: 02919E4BDF8DFA8D6D366C23DA7A3F3A
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/2079-6412/11/1/91 Povezava se odpre v novem oknu

Izvleček
Parquet flooring is one of the most common types of flooring, the surface of which can be covered with various coatings. To avoid possible damage to the parquet during use, it is necessary to test the surfaces before installation according to various non-standard and standard protocols. The present study provides an overview of the interactions between the properties of selected waterborne coatings (solids content, hardness, resistance to cracking, tensile strength) and the properties of oak wood flooring surfaces (dry film thickness, coating adhesion, resistance to scratching, impact, abrasion and cold liquids). The tests conducted showed that the performance of the surface systems was highly dependent on the coating formulations, as they were either one- or two-component systems. Although no major differences in surface resistance to cold liquids were found, there was a correlation between coating thickness, hardness and tensile strength. The harder coatings had higher tensile strengths and lower elongations. The coatings with higher tensile strength and better hardness achieved better adhesion properties. The coatings that exhibited ductile behavior showed the worst scratch resistance. A statistically significant relationship was found between the higher resistance of the flooring systems to impact stress and the improved abrasion resistance. The obtained results provide potential end users of surface coatings with valuable information on the quality that can be expected in wood flooring.

Jezik:Angleški jezik
Ključne besede:coating, wood, flooring, abrasion, scratching, adhesion, cold liquids, hardness, impact, cracking
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:BF - Biotehniška fakulteta
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2021
Št. strani:13 str.
Številčenje:Vol. 11, iss. 1, art. 91
PID:20.500.12556/RUL-127541 Povezava se odpre v novem oknu
UDK:630*829
ISSN pri članku:2079-6412
DOI:10.3390/coatings11010091 Povezava se odpre v novem oknu
COBISS.SI-ID:47273731 Povezava se odpre v novem oknu
Datum objave v RUL:14.06.2021
Število ogledov:1131
Število prenosov:212
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Coatings
Skrajšan naslov:Coatings
Založnik:MDPI AG
ISSN:2079-6412
COBISS.SI-ID:523035673 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.
Začetek licenciranja:15.01.2021

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:premazi, les, talne obloge, abrazija, adhezija, razenje, trdota, pokanje

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:P4-0015
Naslov:Les in lignocelulozni kompoziti

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj