izpis_h1_title_alt

Influence of drum inlet air conditions on drying process in a domestic tumble dryer
ID Novak, Lovrenc (Avtor), ID Gatarić, Pero (Avtor), ID Širok, Brane (Avtor)

URLURL - Izvorni URL, za dostop obiščite https://www.tandfonline.com/doi/pdf/10.1080/07373937.2018.1461111?needAccess=true Povezava se odpre v novem oknu
.pdfPDF - Predstavitvena datoteka, prenos (3,90 MB)
MD5: 1F3E815A1148FFA7FD7D09969B2968E3

Izvleček
This study examines how the inlet air temperature, relative humidity, and flow rate influence the textile drying process in an open cycle tumble dryer. An experimental setup was prepared by connecting a domestic tumble dryer to an external system for controlled heating, humidification, and transport of air. Experiments were conducted by drying cotton textiles (8 kg dry mass) at different air inlet conditions. On the basis of measured data, correlations for determination of the total drying time, the moisture evaporation rate during the constant drying rate, and the area-mass transfer coefficient were developed. The process in the drum was modeled by using an established moisture evaporation model, based on sorption isotherms. A commonly used and a recently reported sorption isotherm for cotton were used with the model. Agreement between calculated and measured drying curves was better in case of the commonly used sorption isotherm, but final moisture content was better predicted by the recently reported sorption isotherm.

Jezik:Angleški jezik
Ključne besede:heat and mass transfer, mathematical modeling, vented tumble dryer, isotherms, textile drying
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Recenzirani rokopis
Datum objave:11.09.2018
Leto izida:2019
Št. strani:Str. 781-792
Številčenje:Vol. 37, no. 6
PID:20.500.12556/RUL-126445 Povezava se odpre v novem oknu
UDK:536.7:648.336(045)
ISSN pri članku:0737-3937
DOI:10.1080/07373937.2018.1461111 Povezava se odpre v novem oknu
COBISS.SI-ID:16225819 Povezava se odpre v novem oknu
Datum objave v RUL:22.04.2021
Število ogledov:1188
Število prenosov:334
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Drying technology
Skrajšan naslov:Dry. technol.
Založnik:Taylor & Francis
ISSN:0737-3937
COBISS.SI-ID:5922823 Povezava se odpre v novem oknu

Licence

Licenca:CC BY-NC 4.0, Creative Commons Priznanje avtorstva-Nekomercialno 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-nc/4.0/deed.sl
Opis:Licenca Creative Commons, ki prepoveduje komercialno uporabo, vendar uporabniki ne rabijo upravljati materialnih avtorskih pravic na izpeljanih delih z enako licenco.
Začetek licenciranja:11.09.2018

Licenca:CC BY-NC-ND 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Brez predelav 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-nc-nd/4.0/deed.sl
Opis:Najbolj omejujoča licenca Creative Commons. Uporabniki lahko prenesejo in delijo delo v nekomercialne namene in ga ne smejo uporabiti za nobene druge namene.
Začetek licenciranja:11.09.2018

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:prenos toplote in mase, matematično modeliranje, prezračevalni sušilni stroj, izoterme, sušenje tekstila

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj