izpis_h1_title_alt

Three-dimensional measurements of bodies in motion based on multiple-laser-plane triangulation
ID Poredoš, Primož (Avtor), ID Povšič, Klemen (Avtor), ID Novak, Boštjan (Avtor), ID Jezeršek, Matija (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (628,84 KB)
MD5: 1A8B6AE92171C27758B14C853313CC8A

Izvleček
This paper presents laser-based, three-dimensional (3D) measuring applications involving three different bodies in motion: a knee joint during leg motion (1) , thoraco - abdominal and back deformation during breathing (2) and the shape of a foot during walking (3) . The first (1) setup is based on a commercial sensor Kinect, whereas the second (2) and the third (3) are based on custom - developed, multiple - line, triangulation measuring systems. Special attention was given to the color - modulation principle and the selection of the proper optical components. Based on the calibration, the accuracy of the system is 1.4 mm (1), 0.7 mm (2) and 0.5 mm (3 ), while the measuring range is 900 x 700 x 600 mm (1), 400 x 600 x 500 mm (2) and 400 x 160 x 180 mm (3). The camera frame rate for each setup is 30 Hz (1), 25 Hz (2) and 30 Hz (3). All the systems were evaluated in vivo on adult volunteers. The presented measuring systems are capable of real - time measurements , while enabling a precise and nonintrusive analysis of shape deformation, which has a lot of potential in clinical diagnosis, patient assistance or the development of new shoe models.

Jezik:Angleški jezik
Ključne besede:laser triangulation, 3D measurement, bodies in motion, color - modulation, shape deformation
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2015
Št. strani:Str. 53-61
Številčenje:Vol. 38, N° 2
PID:20.500.12556/RUL-125756 Povezava se odpre v novem oknu
UDK:004.946:681.518.52(045)
ISSN pri članku:0254-0770
COBISS.SI-ID:14172955 Povezava se odpre v novem oknu
Datum objave v RUL:06.04.2021
Število ogledov:1042
Število prenosov:101
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Revista técnica de la Facultad de Ingeniería
Skrajšan naslov:Rev. téc. Fac. Ing., Univ. Zulia
Založnik:Facultad de Ingeniería
ISSN:0254-0770
COBISS.SI-ID:26288896 Povezava se odpre v novem oknu

Licence

Licenca:CC BY-NC-SA 4.0, Creative Commons Priznanje avtorstva-Nekomercialno-Deljenje pod enakimi pogoji 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-nc-sa/4.0/deed.sl
Opis:Licenca Creative Commons, ki prepoveduje komercialno uporabo in zahteva, da uporabnik predelana dela objavi z enako licenco.
Začetek licenciranja:06.04.2021

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:laserska triangulacija, 3D meritve, telesa v gibanju, barvna modulacija, deformacija oblike

Projekti

Financer:ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:L7-4274
Naslov:Laserska triangulacija v medicini (LASTRIM)

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj