Vpliv hitrosti tiskanja v tehnologiji ciljnega nanašanja slojev na upogibno trdnost polilaktične kisline

Matos, Matej (author), Slemenik Perše, Lidija (mentor)

Pri izdelavi izdelka s 3D tiskanjem lahko nastavimo številne parametre, ki vplivajo na izgled in lastnosti izdelka. Eden izmed nastavljivih parametrov, je hitrost tiskanja. S spremembo hitrosti tiskanja se spremeni tudi viskoznost materiala, ki ga ekstrudiramo in s tem lastnosti izdelka. V zaključni nalogi smo iskali hitrostno območje v katerem so izdelki narejeni s tehnologijo 3D tiskanja najkvalitetnejši. V teoretičnem delu smo si pogledali kako deluje 3D tiskalnik po metodi ciljnega nanašanja plasti, kako vplivata temperatura in hitrost tiskanja na viskoznost ter princip delovanja tritočkovnega upogibnega testa. S 3D tiskalnikom smo izdelali vzorce pri različnih hitrostih tiskanja, ki smo jih preizkušali s pomočjo tritočkovnega upogibnega testa. Na koncu smo vzorce vrednotili na podlagi vizualnega izgleda in odstopanj dimenzij ter na podlagi mehanskih lastnosti pridobljenih iz upogibnega testa.

• Language: Slovenian
• Keywords: 3D tiskanje, hitrost tiskanja, viskoznost, polilaktična kislina, tritočkovni upogibni test, ciljno nanašanje slojev
• Work type: Final paper
• Typology: 2.11 - Undergraduate Thesis
• Organization: FS - Faculty of Mechanical Engineering
• Place of publishing: Ljubljana
• Publisher: [M. Matos]
• Year: 2020
• Number of pages: XIV, 26 f.
• PID: 20.500.12556/RUL-120889
• UDC: 621.9.04:532.13:620.174(043.2)
• COBISS.SI-ID: 32868611
• Publication date in RUL: 26.09.2020

MATOS, Matej, 2020, Vpliv hitrosti tiskanja v tehnologiji ciljnega nanašanja slojev na upogibno trdnost polilaktične kisline [online]. Bachelor’s thesis. Ljubljana : M. Matos. [Accessed 14 April 2025]. Retrieved from: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=eng&id=120889

Secondary language

• Language: English
• Title: Influence of the printing speed in fused filament fabrication tehnology on flexural strength of polylactic acid

Abstract

When creating a product with 3D printing, we can set a number of parameters that affect the appearence and properties of the product. One of the adjustable parameters is the printing speed. By changing the printing speed, the viscosity of the material to be extruded also changes, and thus the properties of the product can change. In the final task of this thesis, we studied for the speed range, in which the products, made with 3D printing technology, would have the highest quality. In theoretical part of the thesis, we studied at how a 3D printer works according to the method of fused filament fabrication, how temperature and print speed affect the viscosity and the principles of operation of a three-point bending test. Using a 3D printer, we produced several samples at different printing speeds, which have been tested with a three-point bending test. Finally, the samples were evaluated on the basis of visual appearance and dimensional deviations, and on the basis of mechanical properties obtained from the bending test.

• Keywords: 3D printing, printing speed, viscosity, polylactic acid, three-point bending test, fused filament fabrication