Eksperimentalno preizkušanje sistema plošč s fazno spremenljivimi snovmi za namen zračnega hlajenja prostora

Švajger, Davor (avtor), Stritih, Uroš (mentor)

V diplomskem delu smo testirali sistem sestavljen iz plošč polnjenih s fazno spremenljivimi snovmi (FSS) za namen hlajenja prostora. Gre za pametno rešitev za zmanjšanje rabe energije, ki jo uporabljamo za hlajenje. Na začetku diplomskega dela je prikazan pregled tovrstnih sistemov z latentnimi hranilniki in teoretično ozadje FSS. Pri eksperimentalnem merjenju smo merili temperature v kanalu, temperature plošč in čas potreben, da so se FSS v ploščah popolnoma stalile in strdile. Pri analizah meritev smo med seboj primerjali rezultate temperatur in časov ter rabljene oziroma akumulirane energije za posamezen proces. Iz naših meritev je bilo ugotovljeno, da je za strjevanje FSS potrebno dovajati zrak več kot 3 ure pri hitrosti med 0,7 m/s in 1,7 m/s ter da je boljše, če je razlika temperatur med zrakom v kanalu in vpihanim zrakom čim večja.

• Jezik: Slovenski jezik
• Ključne besede: fazno spremenljive snovi, latentni hranilniki, zračno hlajenje prostora, eksperimentalni sistemi, zmanjšanje rabe energije
• Vrsta gradiva: Diplomsko delo/naloga
• Tipologija: 2.11 - Diplomsko delo
• Organizacija: FS - Fakulteta za strojništvo
• Kraj izida: Ljubljana
• Založnik: [D. Švajger]
• Leto izida: 2020
• Št. strani: XXII, 50 str.
• PID: 20.500.12556/RUL-119458
• UDK: 519.6:621.5(043.2)
• COBISS.SI-ID: 32763395
• Datum objave v RUL: 09.09.2020

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Experimental testing of a panel system filled with phase change materials for the purpose of cooling the air in the room

Izvleček

In our diploma we tested a panel system filled with PCM for the purpose of cooling the air in the room. The system is a smart solution to reduce the energy consumption we use for cooling. In the first part of our diploma we made an overview of latent storage tanks and PCM in general. While doing the experimental measurments we measured the temperature in the air duct of the system, temperature of the plates and the time needed for PCM to fully melt and solidify. In the analysis we compared the measured temperatures, time needed for the processes to be completed and how much energy was used or was accumulated for an individual measurment. We found out that the fastest way for PCM to solidify, it is necessary to supply air for more than 3 hours to the air duct at the speed rate between 0,7 m/s and 1,7 m/s, and that it's better if the temperature difference between the air in the air duct and the air that is being blown in to the duct is as high as possible.

• Ključne besede: phase change materials, latent storages, air cooling of the room, experimental systems, reducing energy consumption