Vaš brskalnik ne omogoča JavaScript!
JavaScript je nujen za pravilno delovanje teh spletnih strani. Omogočite JavaScript ali pa uporabite sodobnejši brskalnik.
Nacionalni portal odprte znanosti
Odprta znanost
DiKUL
slv
|
eng
Iskanje
Brskanje
Novo v RUL
Kaj je RUL
V številkah
Pomoč
Prijava
Analogue experimental study of fiber formation on two-wheel spinner
ID
Bizjan, Benjamin
(
Avtor
),
ID
Širok, Brane
(
Avtor
),
ID
Blagojevič, Marko
(
Avtor
)
PDF - Predstavitvena datoteka,
prenos
(1,54 MB)
MD5: CFBD0CAA13E65DD26A78D8B26AE703F4
URL - Izvorni URL, za dostop obiščite
https://www.sv-jme.eu/sl/article/analogue-experimental-study-of-fiber-formation-on-two-wheel-spinner/
Galerija slik
Izvleček
In this paper, the process of mineral fiber formation was investigated experimentally on a two-wheel spinner by means of high-speed imaging. Analogue isomalt melt was fiberized at different rotational speeds of spinner wheels, melt flow rates and impingement positions so that the fiberization process was dynamically similar to an industrial mineral wool production process. Images of fiber formation and transport reveal highly complex dynamics of these processes, as fibers mostly occur in form of 3D mutually intertwined structures such as clusters, strands and veils periodically shedding from the melt film. Despite the complexity of flow structures, there is a clear trend of increasing mean fiber length and expansion angle of the coaxial fiber-laden flow as the Weber number and the ratio of melt film velocity to blowing air velocity are increased. The fiberization efficiency (ratio of fiber mass deposited on the collecting mesh to the mass of melt poured) is affected by the impingement position and flow rate of melt as well as the Weber number of melt film. The optimum efficiency was attained at 30° (1 o'clock) impingement position and the ratio of melt film to blowing air flow velocity close to unity.
Jezik:
Angleški jezik
Ključne besede:
spinners
,
fiber formation
,
mineral wool
,
multiphase flow
,
primary layer
,
high-speed imaging
Tipologija:
1.01 - Izvirni znanstveni članek
Organizacija:
FS - Fakulteta za strojništvo
Status publikacije:
Objavljeno
Različica publikacije:
Objavljena publikacija
Leto izida:
2020
Št. strani:
Str. 279-288
Številčenje:
Vol. 66, iss. 5
PID:
20.500.12556/RUL-116198
UDK:
519.8:621.928.3(045)
ISSN pri članku:
0039-2480
DOI:
10.5545/sv-jme.2020.6557
COBISS.SI-ID:
16312323
Datum objave v RUL:
22.05.2020
Število ogledov:
1296
Število prenosov:
699
Metapodatki:
Citiraj gradivo
Navadno besedilo
BibTeX
EndNote XML
EndNote/Refer
RIS
ABNT
ACM Ref
AMA
APA
Chicago 17th Author-Date
Harvard
IEEE
ISO 690
MLA
Vancouver
:
Kopiraj citat
Objavi na:
Gradivo je del revije
Naslov:
Strojniški vestnik
Skrajšan naslov:
Stroj. vestn.
Založnik:
Zveza strojnih inženirjev in tehnikov Slovenije [etc.], = Association of Mechanical Engineers and Technicians of Slovenia [etc.
ISSN:
0039-2480
COBISS.SI-ID:
762116
Sekundarni jezik
Jezik:
Slovenski jezik
Naslov:
Analogna eksperimentalna študija tvorbe vlaken na dvokolesni centrifugi
Ključne besede:
centrifuge
,
razvlaknjenje
,
mineralna volna
,
večfazni tok
,
primarna plast
,
hitre kamere
Projekti
Financer:
ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:
P2-0401
Naslov:
Energetsko strojništvo
Financer:
ARRS - Agencija za raziskovalno dejavnost Republike Slovenije
Številka projekta:
Z7-8271
Naslov:
Izboljšanje procesa razvlaknjenja mineralne volne
Podobna dela
Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:
Nazaj