Izdelava in programiranje operaterskega dela avtomatizirane linije za izdelavo zaslonov LCD

OFAK, MIHA (avtor), Logar, Vito (mentor)

Diplomsko delo opisuje delovanje in izvedbo programa treh operaterskih avtomatiziranih celic, ki so del linije trinajstih postaj, namenjene za avtomatsko sestavo zaslonov LCD. Linija je bila izdelana v sklopu projekta v podjetju INEA. V delu je podrobneje opisan projekt, za katerega sem bil osebno zadolžen. Opisan je tako program programirljivega logičnega krmilnika kot program vmesnika človek-stroj. Oba programa sta napisana v programskem orodju Siemens TIA Portal v15. V prvem delu naloge je opisan del linije, ki se dotika treh operaterskih celic, navedene so tudi naprave, uporabljene na celicah. V nadaljnjih poglavjih sledi opis programa samega, začenši z delom za programirljivi logični krmilnik, katerega program je po želji naročnika v večini napisan v lestvičnem diagramu, le nekatere namensko izdelane funkcije so v strukturiranem tekstu. V nadaljevanju pa sta opisana tudi izgled in funkcionalnost zaslonov vmesnika človek-stroj.

• Jezik: Slovenski jezik
• Ključne besede: avtomatska linija sestavljanja, zaslon LCD, sekvenčni proces, programirljivi logični krmilnik, lestvični diagram, vmesnik človek-stroj
• Vrsta gradiva: Diplomsko delo/naloga
• Organizacija: FE - Fakulteta za elektrotehniko
• Leto izida: 2019
• PID: 20.500.12556/RUL-110886
• Datum objave v RUL: 20.09.2019

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Design and programming of an operator's console in the scope of an automated LCD production line

Izvleček

The thesis describes operation and execution of program made for three operator cells, that are part of a production line composed of thirteen cells. Line is built for the purpose of automatic LCD display assembly and is made as a project in the INEA company. Thesis consists of work on that line that was in my personal domain. Two seperate parts of the program are described: a program of programmable logic controller and a program of human-machine interface. Both of them are written in Siemens TIA portal v15 programming tool. The first part of the thesis presents a part of the production line that concerns the three operator cells, with a brief description of equipment used in them. The following chapters present the program itself, starting with the part for programmable logic controller. Mainly, the program is written in ladder diagram, only a few parts are written in structured text programming language. In the finishing chapter, design and functionality of the human-machine interface is described.

• Ključne besede: automatic assembly line, LCD display, sequential process, programmable logic controller, ladder diagram, human-machine interface