3D tiskana rekonstrukcija Plečnikovega spomenika ter analiza muzejske izkušnje

Škerjanc, Anja (avtor), Gabrijelčič Tomc, Helena (mentor), Kočevar, Tanja Nuša (komentor)

Namen magistrskega dela je izdelava 3D-tiskane rekonstrukcije lesene makete Plečnikovega spomenika Janu Žižki, ki se bo po videzu in sledeč Plečnikovemu slogu čim bolj približala referenčnim skicam, arhitekturnemu načrtu in fotografiji lesene makete, ter ovrednotenje njene uporabnosti v galerijske namene. V teoretičnem delu sta na kratko predstavljena Plečnik kot arhitekt in dogajanje okoli natečaja za postavitev spomenika Janu Žižki. Sledita definicija kulturne dediščine in predstavitev možnosti in omejitve uporabe tehnologij 3D-tiska v kulturni dediščini. V zadnjem delu je bilo pregledano, na kakšen način se izvaja analiza uporabniške izkušanje s pomočjo semantičnega diferenciala. Sledi eksperimentalni del, katerega cilj je opraviti vse faze, potrebne za interpretacijo in reprodukcijo makete. Zaradi nezadostnega števila referenc in informacij je bilo treba poiskali dodatne ustrezne reference, s katerih smo s podrobno analizo pridobili vse informacije o Plečnikovem slogu in videzu husitskih vojakov ter predvsem o njihovem vojskovodji Janu Žižki. Pozornost je usmerjena predvsem na Plečnikovo upodobitev figur, oblek, konj in detajlov, oblekam in rekvizitom husitskih vojakov ter obraznim in telesnim lastnostim Jana Žižka. Sledila sta 3D-modeliranje in interpretacija spomenika. Telesa figur so bila izdelana v programu MakeHuman in nato uvožena v Blender, kjer so jim bili modelirani obleka in rekviziti. Arhitekturni del je bil v celoti modeliran v programu Blender. Figure so bile nato ustrezno pripravljene za 3D-tisk v tehniki stereolitografije (SLA). Arhitekturni del je bil zaradi velikosti v Blenderju razrezan na manjše dele, ki ustrezajo delovnemu volumnu tiskalnika, in pripravljen za tisk. Ta del se je tiskal v tehniki ekstrudiranja materiala s spajanjem slojev (FDM). Po tisku so bili vsi elementi ustrezno naknadno obdelani in 3D tiskana rekonstrukcija se je pripravila za razstavo. S pomočjo dognanj iz pregleda obstoječih raziskav je bila načrtovana in izvedena evalvacija uporabniške izkušnje 3D tiskane makete.

• Jezik: Slovenski jezik
• Ključne besede: 3D-rekonstrukcija, 3D-tisk, Jan Žižka, muzejska izkušnja, Jože Plečnik
• Vrsta gradiva: Magistrsko delo/naloga
• Organizacija: NTF - Naravoslovnotehniška fakulteta
• Leto izida: 2019
• PID: 20.500.12556/RUL-110457
• Datum objave v RUL: 15.09.2019

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: 3D printed reconstruction of Plečnik’s monument and usability analysis for gallery purposes

Izvleček

The main purpose of the master’s thesis is the 3D-reconstruction of Jože Plečnik’s monument to the Czech military leader Jan Žižka, based on multiple references, including his sketches, architectural plans and a photograph of the wooden model of the monument. These references provided insight into Plečnik’s style which was used in the 3D-printed reconstruction. Usability analysis of the reconstruction was carried out, with regard to gallery purposes. Theoretical part of the work includes a brief presentation of Jože Plečnik and the circumstances of his application for designing the monument of Jan Žižka. Following is the definition of cultural heritage and a presentation of possibilities and limits of 3D-printing technologies in regards to cultural heritage. At the end is the theoretical background of audience experience analysis, based on sematic differential. Experimental part includes all phases, which were necessary for correct model interpretation and ultimately, reconstruction. The information obtained solely from Plečnik’s references was insufficient for model reconstruction. That is why a thorough analysis of other sources was carried out to obtain additional information about Plečnik’s style and the appearance of Hussite soldiers, especially Jan Žižka. Most attention was focused on Plečnik’s way of depicting figures and details, clothing, horses, Hussite soldier props and facial and body features of Jan Žižka. Interpretation and 3D modelling of the monument followed. Figure bodies were designed in MakeHuman and then exported to Blender for modelling clothing and props. The architectural model was designed solely in Blender. The figures were then properly prepared for 3D-printing with stereolithography (SLA) technology. The architectural model was too large for printing, so it was separated into smaller parts and prepared for printing, using fuse deposition modeling (FDM). All elements were properly treated after printing and the entire 3D-reconstruction was prepared for exhibition. Evaluation of audience experience and impressions of the reconstruction was carried out, using studies from existing research.

• Ključne besede: 3D-reconstruction, 3D-printing, Jan Žižka, gallery experience, Jože Plečnik