izpis_h1_title_alt

Performance and emissions of liquefied wood as fuel for a small scale gas turbine
ID Buffi, Marco (Author), ID Seljak, Tine (Author), ID Cappelletti, Alessandro (Author), ID Bettucci, Lorenzo (Author), ID Valera-Medina, Augustin (Author), ID Katrašnik, Tomaž (Author), ID Chiaramonti, David (Author)

.pdfPDF - Presentation file, Download (1,43 MB)
MD5: 8B8D4FB988212F8C0F0A95C8D3F83CF5
URLURL - Source URL, Visit https://www.sciencedirect.com/science/article/pii/S030626191831300X?via%3Dihub#! This link opens in a new window

Abstract
This study investigates for the first time the combustion in a micro gas turbine (MGT) of a new bioliquid, a viscous biocrude, which is a liquefied wood (LW) produced via solvolysis of lignocellulosic biomass in acidified glycols. The test rig includes a modified fuel injection line, a re-designed combustion chamber and revised fuel injection positions. The main novelties of this work are: (1) producing of liquefied wood with pure ethylene glycol as a solvent, and methanesulfonic acid as a catalyst, to obtain a bio-crude with lower viscosity and higher lignocellulosics content than previous tested formulations; (2) upgrading raw liquefied wood by blending it with ethanol to further reduce the viscosity of the mixture; (3) utilizing a commercially available MGT Auxiliary Power Unit (APU) of 25%kW electrical power output, with notably reduced extent of adaptations to use the newly obtained fuel mixture. Fuel properties, and their impact on combustion performance using liquefied wood, are investigated by analyzing MGT performance and emissions response at different load and blend ratios. Emissions revealed that the presence of LW in the blends significantly affects CO and NOX concentrations compared to conventional fuels. CO roughly increased from 600%ppm (pure ethanol as fuel) to 1500%ppm (at 20%kW electrical power). The experimental study reveals that it is possible to achieve efficient MGT operation while utilizing high biocrude to ethanol ratios, but a number of adaptations are necessary. The achieved maximum share of liquefied wood in the fuel blend is 47.2% at 25%kW power output. Main barriers to the use of higher share of liquefied wood in these type of systems are also summarized.

Language:English
Keywords:bioliquid, solvolysis, liquefied wood, gas turbine, emissions, combustion
Work type:Article
Typology:1.01 - Original Scientific Article
Organization:FS - Faculty of Mechanical Engineering
Publication status:Published
Publication version:Author Accepted Manuscript
Year:2018
Number of pages:Str. 1193-1204
Numbering:Vol. 230
PID:20.500.12556/RUL-106425 This link opens in a new window
UDC:621.43(045)
ISSN on article:0306-2619
DOI:10.1016/j.apenergy.2018.08.126 This link opens in a new window
COBISS.SI-ID:16230171 This link opens in a new window
Publication date in RUL:22.02.2019
Views:1708
Downloads:581
Metadata:XML DC-XML DC-RDF
:
Copy citation
Share:Bookmark and Share

Record is a part of a journal

Title:Applied energy
Shortened title:Appl. energy
Publisher:Applied Science Publishers
ISSN:0306-2619
COBISS.SI-ID:5134599 This link opens in a new window

Secondary language

Language:Slovenian
Keywords:biogoriva, solvoliza, utekočinjen les, plinska turbina, izpusti škodljivih snovi, zgorevanje

Projects

Funder:ARRS - Slovenian Research Agency
Project number:L2-5468
Name:Uporaba izvirnega lignoceluloznega biogoriva za soproizvodnjo električne energije in toplote

Similar documents

Similar works from RUL:
Similar works from other Slovenian collections:

Back