Preobrazba sobe z omejenimi sredstvi

Repovš, Ela (author), Jenko, Marija (mentor)

Namen diplomskega dela je popolna prenova študentske sobe z omejenimi sredstvi, ki znašajo od 100 do največ 150 evrov. Zaradi omejenih financ sem pri prenovi in oblikovanju morala uporabljati trajnostne pristope oblikovanja, kot je recikliranje. Celotna soba je narejena iz starih lesenih in tekstilnih kosov, ki so bili del prejšnje sobe. Postopek preoblikovanja sem najprej začela z izdelavo makete in oblikovanjem nove sobe v 3D-programu Blender. V 3D-programu sem lahko izdelala mnogo variacij sobe. Nastale so bela, črtasta in barvita soba. V prostoru sem oblikovala dve sobi v sobi, ki služita kot garderobna in spalna niša. Sledila je dejanska preobrazba sobe in z njo izdelava pohištva, posteljnine ter košar, ki se vstavijo v odprte kasete v omari. Pri izdelavi vsega sem bila pozorna na to, da je vsaj 80 odstotkov končnega izdelka recikliranega, da ne presežem zadanega proračuna in da je izdelava kar se le da hitra. Z diplomskim delom sem želela ugotoviti, ali je prenova sobe v danem proračunu možna in če se ga preseže – za koliko.

• Language: Slovenian
• Keywords: prenova sobe, trajnost, recikliranje, les, tekstil, 3D-oblikovanje
• Work type: Bachelor thesis/paper
• Organization: NTF - Faculty of Natural Sciences and Engineering
• Year: 2018
• PID: 20.500.12556/RUL-101502
• Publication date in RUL: 13.06.2018

Secondary language

• Language: English
• Title: Budget room makeover

Abstract

The purpose of the thesis is a complete room makeover with a budget from 100 to maximal 150 euros. Due to limited finances for the renewal and design, I had to turn to sustainability approaches of design, like recycling. The entire room is made of old wooden and textile pieces, which were part of the previous room. I started the makeover by preparing a model and designing the new room in the 3D software Blender. The 3D software enabled me to design many variations of the room. I designed a white, striped and colourful room. In the space I designed to rooms into rooms, which are serving as wardrobe and sleeping niche. This was followed by the actual room makeover and consequently the manufacturing of the furniture, bedding and baskets, which are put into the spaces in the closet. During the manufacture, I paid attention to the fact that at least 80 percent of the final product is recycled, that I do not exceed the budget and that the manufacture is as quick as possible. Through the thesis, I wanted to find out, if a room manufacture with the given budget is possible and if not, to what extent the makeover exceeds the budget.

• Keywords: room makeover, sustainability, recycling, wood, textile, 3D design