izpis_h1_title_alt

Vpliv globine obdelave tal na porabo goriva in na pripravo setvene posteljice pri delu z vrtavkasto brano
ID Dular, Luka (Avtor), ID Bernik, Rajko (Mentor) Več o mentorju... Povezava se odpre v novem oknu

.pdfPDF - Predstavitvena datoteka, prenos (4,66 MB)
MD5: E1CCC096BADC0ABE8031C6002516FDE6

Izvleček
Na Laboratorijskem polju Biotehniške fakultete smo v letu 2012 izvedli poljski poskus, v katerem smo uporabili vrtavkasto brano za pripravo tal za setev koruze. Globino obdelave tal smo nastavili na 5 cm, 10 cm in 15 cm. Želeli smo ugotoviti vpliv obdelave tal na porabo goriva, na fizikalno mehanske lastnosti tal v setveni posteljici in na vznik koruze. Poskusna zasnova so bili slučajni bloki. V poskusu smo uporabili traktor z brezstopenjskim menjalnikom z imensko močjo 73 kW in vrtavkasto brano z delovno širino 2,5 m. Hitrost obdelave tal na traktometru je bila 5,0 km/h in vrtilna frekvenca motorja 1900 min-1. Poraba goriva na uro ter poraba goriva na hektar sta naraščali s povečanjem nastavljene globine obdelave tal z vrtavkasto brano od 5 do 15 cm. Pri nastavljeni globini obdelave tal 5 cm je bila vertikalna upornost tal na globinah med 8 in 13 cm večja kot pri globinah obdelave tal pri 10 in 15 cm. Med tremi nastavljenimi globinami obdelave tal z vrtavkasto brano ni bilo značilnih razlik v fizikalnih lastnosti tal v setveni posteljici in vzniku koruze. Globina obdelave tal 10 cm je bila najprimernejša, tako glede porabe goriva na uro in porabe goriva na hektar, kot tudi fizikalno mehanskih lastnosti tal v setveni posteljici.

Jezik:Slovenski jezik
Ključne besede:obdelava tal, vrtavkasta brana, poraba goriva, fizikalno-mehanske lastnosti tal, koruza
Vrsta gradiva:Magistrsko delo/naloga
Tipologija:2.09 - Magistrsko delo
Organizacija:BF - Biotehniška fakulteta
Založnik:[L. Dular]
Leto izida:2018
PID:20.500.12556/RUL-100743 Povezava se odpre v novem oknu
UDK:631.313:633.15(043.2)
COBISS.SI-ID:8960633 Povezava se odpre v novem oknu
Datum objave v RUL:11.04.2018
Število ogledov:1776
Število prenosov:450
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Sekundarni jezik

Jezik:Angleški jezik
Naslov:Influence of soil cultivation depth on fuel consumption and on preparation of seed bed using rotary harrow
Izvleček:
In 2012 the field trial was carried out on the Laboratory Field of Biotechnical Faculty, where a rotary harrow was used for soil preparation just before maize planting. The soil cultivation depth was adjusted to 5 cm, 10 cm and 15 cm. We wanted to establish the influence of the soil cultivation on the fuel consumption, on the physical-mechanical soil properties of the seed bed and at the end on the field emergence. The trial was designed as random blocks. A tractor with stepless transmission and nominal power of 73 kW and a rotary harrow with working width of 2.5 m were used. The speed of soil cultivation was 5.0 km/h on the tractometer and the engine rotational frequency was 1900 rpm. Both the fuel consumption per hour and the fuel consumption per hectare increased by increasing the adjusted soil depth cultivation from 5 cm to 15 cm using the rotary harrow. At the adjusted soil cultivation depth of 5 cm, the vertical soil resistance at depths between 8 and 13 cm was greater than at the adjusted soil depths of 10 cm and 15 cm. No significant differences were found regarding the soil physical properties in the seed bed and the field emergence of maize among three adjusted soil cultivation depths. The soil cultivation depth of 10 cm proved to be the most appropriate in view of the fuel consumption per hour and the fuel consumption per hectare as well as the physical-mechanical soil properties of the seed bed.

Ključne besede:soil cultivation, rotary harrow, fuel consumption, physical-mechanical soil properties, maize

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj