In this thesis we have designed steel reinforcement for a structure using JUBhome system, on the basis of simplified analysis. Design of the structure was carried out according to standards and guidelines for earthquake resistant design of foundations and reinforced concrete walls. In the first part of thesis we have introduced earthquake loads, guidelines for earthquake resistant design and controls, which have to be fulfilled, when using foundation system JUBHome BASE and wall JUBHome WALL. In the second part the analysis of selected structure is described. The analysis was carried out using SAP2000 software. Vibration periods, mode shapes and loads of separate walls were the results of the analysis and were used for the design of the structure. In the last part procedure of design of the most critical wall element shown by the analysis was demonstrated. Longitudinal and shear reinforcement as well as reinforcement of edges were determined. The position of reinforcement bars has been demonstrated using reinforcement plan.