izpis_h1_title_alt

An initial study of Aerosol Jet printed interconnections on extrusion-based 3D-printed substrates
Vogeler, Frederik (Avtor), Verheecke, Wesley (Avtor), Voet, André (Avtor), Valkenaers, Hans (Avtor)

URLURL - Predstavitvena datoteka, za dostop obiščite http://www.dlib.si/details/URN:NBN:SI:doc-ZJEXWXGQ Povezava se odpre v novem oknu

Izvleček
The combination of different additive manufacturing techniques to produce freeform products with multifunctional properties is gaining more and more popularity. In the presented research Aerosol Jet Printing (AJP) is combined with extrusion based 3D printing. AJP starts from an ink to create micro tracks, unlike extrusion based 3D printers where the extruded material usually has a resolution of tenths of millimeters. AJP can therefore be a complementary technique for extrusion based 3D printing, in this manner fine high resolution features can be added onto relatively fast produced extrusion based 3D printed parts. Furthermore, AJP can be used to produce electrically conductive tracks to create interconnects, inductors, capacitors, strain gauges, etcIn this paper the creation of AJP manufactured interconnects on extrusion based 3D printed substrates is investigated. Important AJP process parameters to take into account are flow rates of the aerosol, flow rate of the sheath gas, temperature settings of the ink and substrate, platform speed and nozzle to substrate distance. To obtain reliable results, the AJP process parameters are optimized for printing single layered and multilayered silver ink tracks on extrusion based 3D printed surfaces. Important quality output parameters include the dimensions and the electrical properties of the printed interconnects.

Jezik:Angleški jezik
Ključne besede:Aerosol Jet printing, extrusion based 3D printing, silver ink, interconnects, printed tracks, conductive tracks
Vrsta gradiva:Delo ni kategorizirano (r6)
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Leto izida:2013
Št. strani:str. 689-696, SI 139
Številčenje:Vol. 59, no. 11
UDK:531/533:004
ISSN pri članku:0039-2480
DOI:10.5545/sv-jme.2013.999 Povezava se odpre v novem oknu
COBISS.SI-ID:13221403 Povezava se odpre v novem oknu
Število ogledov:359
Število prenosov:152
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
 
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
:
Objavi na:AddThis
AddThis uporablja piškotke, za katere potrebujemo vaše privoljenje.
Uredi privoljenje...

Gradivo je del revije

Naslov:Strojniški vestnik
Skrajšan naslov:Stroj. vestn.
Založnik:Zveza strojnih inženirjev in tehnikov Slovenije [et al.], = Association of Mechanical Engineers and Technicians of Slovenia [et al.]
ISSN:0039-2480
COBISS.SI-ID:762116 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:tiskanje, ekstruzijsko 3D-nalaganje, srebrno črnilo, povezave, tiskani vodi, hibridna izdelava

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj