izpis_h1_title_alt

Accuracy improvement of point data reduction with sampling-based methods by fuzzy logic-based decision-making
Budak, Igor (Avtor), Soković, Mirko (Avtor), Barišić, Branimir (Avtor)

URLURL - Predstavitvena datoteka, za dostop obiščite http://www.sciencedirect.com/science/article/pii/S0263224111001047 Povezava se odpre v novem oknu

Izvleček
Modern 3D-digitization systems, which are employed by reverse engineering (RE), feature the ever-growing scanning speed, with the ability to generate large quantity of points in a unit of time. Generally speaking, that is advantageous for the quality and efficiency of RE modelling. However, huge number of point data, generated in the course of 3D-digitization, can turn into a serious practical problem, later on, when the CAD model is generated. Having this in mind substantial research effort has been focused towards development of methodologies for reduction of point data which is the result of 3D-digitization. The analysis of point data reduction using sampling methods revealed several problems among which the most prominent two are lack of feedback information on the effect of the reduction of a particular point data on the deviation of the resulting cross-sectional curve and insufficient efficiency of decision-making procedures. With this in mind, proposed in this article is an approach which is based on analysis of deviation (caused by point data reduction) and fuzzy logic-based decision-making. This approach significantly advances the quality of sampling-based point data reduction, which was demonstrated on comparative analysis of a obtained experimental results.

Jezik:Angleški jezik
Ključne besede:3D-digitization, point data reduction, fuzzy logic, reverse engineering
Vrsta gradiva:Delo ni kategorizirano (r6)
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Leto izida:2011
Št. strani:str. 1188-1200
Številčenje:Vol. 44, iss. 6
UDK:004.62:658.5
ISSN pri članku:0263-2241
DOI:10.1016/j.measurement.2011.03.026 Povezava se odpre v novem oknu
COBISS.SI-ID:11859227 Povezava se odpre v novem oknu
Število ogledov:522
Število prenosov:194
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
 
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
:
Objavi na:AddThis
AddThis uporablja piškotke, za katere potrebujemo vaše privoljenje.
Uredi privoljenje...

Gradivo je del revije

Naslov:Measurement
Skrajšan naslov:Measurement
Založnik:Elsevier
ISSN:0263-2241
COBISS.SI-ID:25917696 Povezava se odpre v novem oknu

Sekundarni jezik

Jezik:Angleški jezik
Ključne besede:vzvratno inženirstvo, mehka logika, redukcija podatkov, 3D-digitalizacija

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj