izpis_h1_title_alt

Measurement and numerical analysis of surface residual stresses occurring under different quenching conditions
Grum, Janez (Avtor), Kek, Tomaž (Avtor), Zupančič, Martin (Avtor), Batista, Milan (Avtor), Kosel, Franc (Avtor)

URLURL - Predstavitvena datoteka, za dostop obiščite http://dx.doi.org/10.1504/IJMMP.2008.016946 Novo okno

Izvleček
The paper presents the results of residual stresses modelling and experimental stress measurements after quenching of AISI 4140 heat-treatment steel specimens. In the research, cylindrical specimens of O 40 * 160 mm in size were used where as in modelling specimens of the same diameter, i.e., O 40mm, but of infinite length were employed. One quenching agent was selected, i.e., a 15% polymer water solution. The influence of residual stresses due to martensitic transformation and temperature differences was investigated with different initial specimen temperatures above and under TAC1. Two different temperatures were chosen in order to reveal the nature and quantitative properties of temperature- and transformational-induced residual stresses. Analytical work was made by mathematical modelling of heat treatment which supposes that the rheological model of a continuum is thermo-elasto-plastic material. Austenitic-martensitic transformations are described with Koistinen-Marburger equation. Related experimental measurements revealed relatively high temperature- and transformational-induced residual stresses, which were obtained with the hole drilling relaxation method.

Jezik:Angleški jezik
Ključne besede:gašenje, matematično modeliranje, povratne napetosti, meritve napetosti, toplotne obdelave, quenching, mathematical modelling, residual stress, surface stress, stress meacurement, heat treatment steel, martensitic transformation, temperature differences
Vrsta gradiva:Delo ni kategorizirano (r6)
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Leto izida:2008
Št. strani:str. 86-99
Številčenje:Vol. 3, no. 1
UDK:621.785.084
ISSN pri članku:1741-8410
COBISS.SI-ID:10512155 Povezava se odpre v novem oknu
Število ogledov:415
Število prenosov:117
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
 
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
:
Objavi na: Bookmark and Share

Gradivo je del revije

Naslov:International journal of microstructure and materials properties
Skrajšan naslov:Int. j. microstruct. mater. prop.
Založnik:Inderscience Publishers
ISSN:1741-8410
COBISS.SI-ID:8823323 Novo okno

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj