izpis_h1_title_alt

Modelling of residual stress profiles in plasma nitrided tool steel
Leskovšek, Vojteh (Avtor), Podgornik, Bojan (Avtor), Nolan, D. (Avtor)

URLURL - Predstavitvena datoteka, za dostop obiščite http://dx.doi.org/10.1016/j.matchar.2007.03.009 Povezava se odpre v novem oknu

Izvleček
Residual stresses may be present in engineering components as an unintended consequence of manufacturing processes, but they may also be introduced deliberately to beneficial effect during surface engineering procedures. Plasma nitriding and nitrocarburizing are such processes of particular importance for tool steel components used in tool, die and machine applications. These processes afford significant advantages, such as greatly improved wear and corrosion resistance, as well as fatigue strength resulting from the generation of near-surface compressive residual stresses. A precise knowledge of the level and distribution of residual stresses that exist in such engineering components is necessary for product development and quality control purposes, as well as for the accurate prediction of fatigue resistance. If located at the same depth as the Hertzian stress concentrations, compressive residual stresses can greatly improve the fatigue properties of loaded surfaces. Therefore, reliable methods for residual stressdetermination are required, with residual stress measurement techniques having their limitations. The aim of the present paper was to correlate the residual stress distribution in plasma nitrided and nitrocarburized H11 tool steel with the microhardness depth profile, in order to determine whether a relatively simple microhardness-related parameter could be used to predict the depth of the maximum compressive residual stresses, and to thereby enable optimization of the nitriding parameters for specific contact conditions.

Jezik:Angleški jezik
Ključne besede:tribologija, proizvodni procesi, nitrokarboriranje, plazemsko nitriranje, povratne napetosti, mikrotrdota, modeliranje, plasma nitriding, nitrocarburizing, residual stress, microhardness, modeling
Vrsta gradiva:Delo ni kategorizirano (r6)
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Leto izida:2008
Št. strani:str. 454-461
Številčenje:Vol. 59, no. 4
UDK:621.785.53
ISSN pri članku:1044-5803
COBISS.SI-ID:10380571 Povezava se odpre v novem oknu
Število ogledov:422
Število prenosov:157
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
 
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
:
Objavi na:AddThis
AddThis uporablja piškotke, za katere potrebujemo vaše privoljenje.
Uredi privoljenje...

Gradivo je del revije

Naslov:Materials characterization
Skrajšan naslov:Mater. charact.
Založnik:Elsevier
ISSN:1044-5803
COBISS.SI-ID:27546368 Povezava se odpre v novem oknu

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj