izpis_h1_title_alt

Improvement in galling performance through surface engineering
Podgornik, Bojan (Avtor), Vižintin, Jože (Avtor), Hogmark, Sture (Avtor)

URLURL - Predstavitvena datoteka, za dostop obiščite http://dx.doi.org/10.1179/174329406X122946 Povezava se odpre v novem oknu

Izvleček
The aim of the present work was to investigate and compare different surface engineering techniques in terms of galling properties of forming tool steel when sliding against different work materials. The surface engineering techniques included were different grades of polishing, plasma nitriding and different hard coatings, all applied to cold work tool steel respectively. Investigation results indicate that the galling tendency can be greatly reduced by proper polishing of the tool surface. If polished after treatment, plasma nitrided surface will provide further improvement in friction and wear properties of the tool steel and especially for aluminium and titanium alloys reduce the galling tendency. On the other hand, coating selection for improvedgalling performance of coated forming tool steel greatly depends on the type of work material. In the case of stainless steel, carbon based coatings provide the best protection against the work material transfer, while forming of aluminium and titanium based alloys, requires nitride type coatings.

Jezik:Angleški jezik
Ključne besede:preoblikovanje, preoblikovalna orodja, inženiring površin, prevleke PVD, plazemsko nitriranje, forming, forming tools, surface engineering, PVD coatings, plasma nitriding, galling
Vrsta gradiva:Delo ni kategorizirano (r6)
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Leto izida:2006
Št. strani:str. 235-238
Številčenje:Letn. 22, št. 4
UDK:621.7
ISSN pri članku:0267-0844
COBISS.SI-ID:9590043 Povezava se odpre v novem oknu
Število ogledov:722
Število prenosov:197
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
 
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
:
Objavi na:AddThis
AddThis uporablja piškotke, za katere potrebujemo vaše privoljenje.
Uredi privoljenje...

Gradivo je del revije

Naslov:Surface engineering
Skrajšan naslov:Surf. eng.
Založnik:Institute of Metals, Wolfson Institute for Surface Engineering
ISSN:0267-0844
COBISS.SI-ID:5326855 Povezava se odpre v novem oknu

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj