izpis_h1_title_alt

The lubrication of DLC coatings with mineral and biodegradable oils having different polar and saturation characteristics
Kalin, Mitjan (Avtor), Vižintin, Jože (Avtor), Vercammen, K. (Avtor), Barriga, J. (Avtor), Arnšek, Aleš (Avtor)

URLURL - Predstavitvena datoteka, za dostop obiščite http://dx.doi.org/10.1016/j.surfcoat.2005.03.016 Povezava se odpre v novem oknu

Izvleček
Due to improved performance over the last decade, diamond-like carbon (DLC) coatings are more frequently used in highly loaded mechanical components that sometimes need to operate under boundary- or mixed-lubrication conditions. However, DLC coatings are considered as "inert" coatings with a low surface energy and their lubrication ability according to conventional metal-lubrication mechanisms is therefore questionable. In order to investigate whether the base oil polarity and saturation characteristics play a role in these processes, a tribological investigation of the a-C:H coating lubricated with natural (sunflower) and synthetic (saturated and un-saturated)biodegradable oils that posses different amount of polar components and double bonds was performed. For a comparison we also used mineral base oil with low polar component. The DLC/DLC and steel/steel contacts were tested with base oils without additives and in combination with AW and EP additives. Despite the higher wear compared to steel/steel contacts,the results suggest that the wear of DLC/DLC contacts can be importantly improved by using oils with more polar groups and non-saturated molecules. These findings, together with well-known and even proverbial "low-friction properties", suggest a great potential for the use of DLC coatings in combination with biodegradable oils, particularly when additives are present.

Jezik:Angleški jezik
Ključne besede:DLC coatings, biodegradable oil, lubrication, polarity, saturation, wear, friction
Vrsta gradiva:Delo ni kategorizirano (r6)
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Leto izida:2006
Št. strani:str. 4515-4522
Številčenje:Letn. 200, št. 14/15
UDK:621.793:621.89
ISSN pri članku:0257-8972
COBISS.SI-ID:9063451 Povezava se odpre v novem oknu
Število ogledov:668
Število prenosov:280
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
 
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
:
Objavi na:AddThis
AddThis uporablja piškotke, za katere potrebujemo vaše privoljenje.
Uredi privoljenje...

Gradivo je del revije

Naslov:Surface & coatings technology
Skrajšan naslov:Surf. coat. technol.
Založnik:Elsevier Sequoia
ISSN:0257-8972
COBISS.SI-ID:3084815 Povezava se odpre v novem oknu

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj