20.500.12556/RUL-99190
Viscoelasticity of new generation thermoplastic polyurethane vibration isolators
This paper presents the analysis of pressure dependence of three thermoplastic polyurethane (TPU) materials on vibration isolation. The three TPU Elastollan materials are 1190A, 1175A, and 1195D. The aim of this investigation was to analyze how much the performance of isolation can be enhanced using patented Dissipative bulk and granular systems technology . The technology uses granular polymeric materials to enhance materials properties (without changing its chemical or molecular composition) by exposing them to "self-pressurization," which shifts material energy absorption maxima toward lower frequencies, to match the excitation frequency of dynamic loading to which a mechanical system is exposed. Relaxation experiments on materials were performed at different iso- baric and isothermal states to construct mastercurves, the time-temperature-pressure interrelation was modeled using the Fillers-Moonan-Tschoegl model. Dynamic material functions, related to isolation stiffness and energy absorption, were determined with the Schwarzl approximation. An increase in stiffness and energy absorption at selected hydrostatic pressure, compared to its stiffness and energy absorption at ambient conditions, is represented with K_k(p, [omega]), defining the increase in stiffness and K_d (p, [omega]), defining the increase in energy absorption. The study showed that close to the glassy state, moduli of 1190A and 1195D are about 6-9 times higher compared to 1175A, whereas their properties at ambient conditions are, for all practical purposes, the same. TPU 1190A turns out to be most sen- sitive to pressure: at 300 MPa its properties are shifted for 5.5 decades, while for 1195D and 1175A this shift is only 3.5 and 1.5 decades, respectively. In conclusion, the stiffness and energy absorption of isolation may be increased with pressure for about 100 times for 1190A and 1195D and for about 10 times for 1175A. Published by AIP Publishing.
vibration isolators
viscoelasticity
hydrostatics
polymers
continuum mechanics
izolatorji vibracij
viskoelastičnost
hidrostatičnost
polimeri
mehanika kontinuuma
true
false
false
Angleški jezik
Slovenski jezik
Delo ni kategorizirano
2018-01-08 08:19:39
2018-02-14 09:47:34
2022-08-16 10:36:29
0000-00-00 00:00:00
0
0
0
18
12
29
2017
0000-00-00
PostprintKoncna
NiDoloceno
NiDoloceno
0000-00-00
0000-00-00
0000-00-00
539.3:678
15825947
Bek_ID=15825947.pdf
Bek_ID=15825947.pdf
1
3AB0CF1178088CA2251789A3784A1FD7
06c19528e3efba3df2f53cb279e26b89bc4c1d122fd63bd05d1ffe0f725e6fcb
856b5777-a1b4-11eb-a523-00155dcfd717
20.500.12556/rul/0c34d548-48aa-49db-af80-9781678427cf
https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=108628
Fakulteta za strojništvo
0
0
0