20.500.12556/RUL-32604
Uporaba metod strojnega učenja za razvrščanje lesa v trdnostne razrede
diplomska naloga
The use of machine learning methods for the grading of timber strength
Diplomska naloga obravnava problem razvrščanja lesa v trdnostne razrede. Vsak material, uporabljen v konstrukciji, mora biti razvrščen v trdnostni razred in ustrezno označen z oznako CE. Za razvrstitev v določen trdnostni razred mora izpolnjevati minimalne zahteve tega razreda glede mehanskih karakteristik. Les je nehomogen anizotropen material. Trdnost lesa znotraj posamezne vrste je med drugim odvisna tudi od dela debla, s katerega odreţemo preizkušanec, od nahajališča, okolice, prsti, starosti, poškodovanosti, grčavosti itd. Edini način za točno določitev trdnosti lesa je porušitev preizkušanca. Trenutno je v Sloveniji uveljavljeno le vizualno ocenjevanje lesa, ki pa je zelo konzervativno, zato je veliko dobrega lesa prodanega pod zasluţeno ceno. V nalogi smo z uporabo metod strojnega učenja razvili sistem, ki je osnova za boljše razvrščanje lesenih elementov v razrede. Analizirano je bilo več kot 5000 lesenih preizkušancev, na katerih so bile opravljene tako neporušne kot porušne preiskave. Rezultati preiskav so bili obdelani s programoma WEKA Toolkit in IBM SPSS 20. Poleg osnovnih statističnih testov so bile za obdelavo uporabljene nevronske mreţe in regresijska drevesa. Pokazali smo, da je bil izbrani vzorec dovolj velik, ter da so nevronske mreţe primerno orodje za določevanje parametrov za klasificiranje lesa na osnovi rezultatov neporušnih analiz.
This work addresses the problem of grading timber into strength classes. All materials, used in the construction, have to be graded and marked with a CE mark. For the classification into a certain strength class, the material has to adhere to minimal mechanical requirements of the class. Timber is an anisotropic, non-homogeneous material. The timber strength within a certain species depends, among other factors, on the part of the log that the sample has been cut off, the environment of its growth, the type of soil, the timber age, the damage to the timber, the presence of knots etc. The only accurate method for determining timber strength is destructive testing. Presently, the only method considered relevant in Slovenia is the visual evaluation of the timber, which is a very conservative method and results in lower prices of good quality timber. The goal of the presented work was to develop a system for timber grading on the basis of results of non-destructive methods, particularly by using the machine learning methods. The analysis sample consists of more than 5000 timber samples, which have been tested with non-destructive, as well as destructive methods. Results of the performed tests were analysed by using the machine learning algorithms contained in the WEKA Toolkit and the statistical methods of the IBM's SPSS 20 program. In order to analyze the collected data, standard statistical tests were performed for the analysis and artificial neural networks, as well as regression trees, were also used. The presented results indicate that the number of the samples was sufficient and that the formalism of the artificial neural networks is the appropriate tool for determining the timber grading parameters on the basis of results of non destructive testing methods.
gradbeništvo
diplomska dela
UNI
trdnostni razred
les
dinamični odziv
elastični modul
strojno učenje
regresijsko drevo
nevronska mreža
graduation thesis
civil engineering
strength clas
timber
dynamic response
module of elasticity
machine learning
regression tree
artificial neural network
true
false
false
[J. Dobnikar]
Slovenski jezik
Angleški jezik
Diplomsko delo
2015-07-10 10:18:01
2015-07-10 10:18:01
2022-12-16 11:00:01
0000-00-00 00:00:00
2012
0
Ljubljana
2012
Ljubljana
IX, 63 str.
0000-00-00
NiDoloceno
NiDoloceno
NiDoloceno
0000-00-00
0000-00-00
0000-00-00
004.85:624.011.1(043.2)
5809249
GRU_3216_Dobnikar.pdf
GRU_3216_Dobnikar.pdf
1
EE982E8E0D92A0B0D3BF2505449FD553
ccb498c3563c43591bdbc093b7dee4da448d4cb4376caa66d7cc1d83b05cba62
e23951ef-a1b2-11eb-a523-00155dcfd717
20.500.12556/rul/7b4a80dc-0974-4f8a-9108-7d5d397cfc7b
https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=97995
Fakulteta za gradbeništvo in geodezijo
0
0
0