20.500.12556/RUL-181709 Full-field validation of a thermo-mechanical model for directed energy deposition using IR thermography and stereo DIC This paper presents a thermo-mechanical finite element (FE) modelling framework for laser-based directed energy deposition (DED-LB) that is validated and calibrated using a novel full-field, in-situ experimental approach. The measuring setup combines infrared (IR) thermography and stereo digital image correlation (DIC) to enable continuous, non-intrusive, full-field measurement of transient temperature and displacement fields on the substrate without interfering with the DED process. These measurements provide direct input for reliable model calibration and a consistent basis for full-field validation of both thermal and mechanical response of the numerical model. The calibrated FE model accurately reproduces the measured thermal histories and the evolution of substrate deformation throughout the process. Based on the validated model, the dominant deformation mechanisms are identified, highlighting the combined effects of thermal gradients, contraction of the solidifying deposited material, and mechanical boundary conditions. The study further introduces a new analytical bead-geometry modelling method that estimates the geometry of initial and overlapping beads without additional experiments and establishes a consistent link between realistic and simplified bead representations while preserving deposited mass and heat input. Comparative simulations demonstrate that simplified rectangular bead profiles can reduce computational cost by up to 70% with only minor loss of accuracy, making them suitable for parametric studies. Finally, different DED strategies are evaluated, showing that an inward-spiral strategy leads to the lowest substrate deformation and the most uniform residual-stress distribution, whereas unidirectional and bidirectional strategies produce larger deflections and stronger springback. directed energy deposition thermo-mechanical modelling residual stress and deformation digital image correlation usmerjeno nanašanje materiala termo-mehansko modeliranje zaostale napetosti in deformacije korelacija digitalnih slik true false true Angleški jezik Slovenski jezik Neznano 2026-04-14 09:45:58 2026-04-14 09:46:09 2026-04-15 04:25:16 0000-00-00 00:00:00 2026 0 0 26 str. art. 104554 Vol. 258 2026 0000-00-00 Zaloznikova Objavljeno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 004.9 1872-6925 10.1016/j.finel.2026.104554 275099395 RAZ_Kovsca_Dejan_2026.pdf RAZ_Kovsca_Dejan_2026.pdf 1 29ABB63AF4B4E68A45EC55C31688A548 d78b75b47cbdb417b374d083ea9c226ff537f4b60a84f8a47838b731786f9573 78ad9245-37d6-11f1-b0ab-0050569b8976 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=232392 https://www.sciencedirect.com/science/article/pii/S0168874X26000442 1 c8ce32c6-37d5-11f1-b0ab-0050569b8976 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=232391 Fakulteta za strojništvo 0 0 0