20.500.12556/RUL-169256 Characterising through-thickness shear anisotropy using the double-bridge shear test and finite element model updating The accuracy of numerical predictions in sheet metal processes involving multiaxial stress–strain states (e.g., blanking, riveting, and incremental forming) heavily depends on the characterisation of plastic anisotropy under multiaxial loading conditions. A fully calibrated 3D plastic anisotropy model is essential for this purpose. While in-plane material behaviour can be conventionally characterised through uniaxial and equi-biaxial tensile tests, calibrating out-of-plane material behaviour remains a significant challenge. This behaviour, governed by out-of-plane shear stress and associated material parameters, is typically described by out-of-plane shear yielding. These parameters are notoriously diffi- cult to determine, leading researchers to frequently assume isotropic behaviour or identical shear parameters for in-plane and out-of-plane responses. Although advanced calibrations may utilise crystal plasticity modelling, there remains a critical need for macro-mechanical characterisation methods. This paper presents an out-of-plane shear testing and material characterisation procedure based on full-field strain measurements using digital image correlation (DIC). Strains within the shear zone are measured via DIC and employed in the Finite Element Model Updating (FEMU) to identify out-of-plane shear parameters of a 2.42 mm thick, cold-rolled AW5754-H22 aluminium alloy sheet, using the Yld2004-18p yield criterion. Given that the characteristic strain response at this scale may be influenced by local crystal structure behaviour on the surface, this paper evaluates the feasibility of such measurements. Finally, to test the validity of the full-field-based approach, the FEMU-identified parameters are compared against results obtained through a classical optimisation procedure based on force-elongation measurements from the shear zone. plastic anisotropy shear testing YLD2004–18p yield function material identification digital image correlation plastična anizotropija strižno testiranje YLD2004–18p funkcija tečenja materialna identifikacija metoda korelacije digitalnih slik true false true Angleški jezik Slovenski jezik Članek v reviji 2025-05-21 08:43:16 2025-05-21 08:43:24 2025-05-22 04:03:48 0000-00-00 00:00:00 2025 0 0 20 str. issue 10, art. 2220 Vol. 18 2025 0000-00-00 Zaloznikova Objavljeno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 621.742.4 1996-1944 10.3390/ma18102220 236118275 RAZ_Starman_Bojan_2025.pdf RAZ_Starman_Bojan_2025.pdf 1 2B7EB3EDBF118111D27942D8019BD2AB ac2e92a0420d0922c14a91d3e72208589ca001a4a891b58eb32e2a1aec1e691c 922c09a3-360e-11f0-b232-0050569b8976 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=210514 https://www.mdpi.com/1996-1944/18/10/2220 1 a37232bb-360d-11f0-b232-0050569b8976 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=210510 Fakulteta za strojništvo 0 0 0