20.500.12556/RUL-166907 Energy consumption analysis and parameter optimization in high-feed milling operation Improving the performance, efficiency and productivity of the machining, reducing energy consumption and establishing control over the machining process are the main goals of the production technologies development. This paper provides the basis for establishing of a process management and determining of optimal conditions for performing high-feed milling, as a special machining method. An experimental study of the analysis of the influence of process parameters, namely depth of cut and feed rate, on the output parameters of high-feed milling were carried out. As output indicators of the performance of the high-feed milling, namely the energy efficiency of the machine tool and the productivity of the machining process were analysed. Based on experimental data, analysis and modelling of the material removal rate per unit of time and electrical energy consumption were carried out. A workpiece made from aluminium was machined on a three-axis machining centre. By using the boundaries of the domain of process parameters and the optimization objective function, the optimization of the values of the process parameters was carried out. As an optimal solution, the following process parameters were obtained: cutting depth ap = 2 mm and feed rate vf = 1500 mm/min. high-feed milling energy consumption modelling optimization true false true Angleški jezik Angleški jezik Neznano 2025-01-30 10:15:49 2025-01-30 10:15:51 2025-01-31 04:01:51 0000-00-00 00:00:00 2024 0 0 Str. 498-507 no. 2 Vol. 6 2024 0000-00-00 Zaloznikova Objavljeno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 621:681.5.015.23 2683-4111 10.24874/PES06.02.015 224497923 RAZ_Sredanovic_Branislav_2024.pdf RAZ_Sredanovic_Branislav_2024.pdf 1 67D90921CADE1732C9F8033D865F1D2A 4b2ae96d5ceac63c69c79e27e42095aab240916d1d1d65cb0893300a2ff95f9b 2ac08bb8-deea-11ef-b232-0050569b8976 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=198916 https://pesjournal.net/paper.php?id=540 1 fb372d54-dee9-11ef-b232-0050569b8976 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=198915 Fakulteta za strojništvo 0 0 0