20.500.12556/RUL-166731 Effect of filament material and printing temperature on 3D printing extrusion force dataset In this study, a modified 3D printer hotend with a load cell attached to the feed system was used to evaluate the effects of filament material composition and printing parameters on the required extrusion force. Four different materials (commercial PLA, pure PLA, wood PLA with different amount of wood particles and wood PLA with different amount of thermally modified wood particles) were used for 3D printing and the feeding resistance was measured. The filament feeder was connected to the extruder hotend via a load cell, which measured the forces required to push the filament through the extruder and nozzle. Three die temperatures of 200, 210 and 220 °C were used. 3d print wood-polymer composites extrusion force rheology les PLA filamenti delež lesa sila ekstrudiranja parametri tiskanja true false false Repozitorij Univerze v Ljubljani Angleški jezik Slovenski jezik Raziskovalni podatki 2025-01-23 11:20:19 2025-01-23 21:31:48 2026-02-17 10:17:15 0000-00-00 00:00:00 2025 0 0 0000-00-00 NiDoloceno Objavljeno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 630*8 268696067 Data_set_marking_explanation.pdf Data_set_marking_explanation.pdf 1 A3074DD23F3992EA9E6485D7AFEFFEEE b5289e0fe7d7b2074c759e7fa8328d32c215f7cdf1e8cb10db783e1b372145f2 46a6c054-d973-11ef-b232-0050569b8976 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=198555 data_set.zip data_set.zip 1 5BAD1825B7C97843C1847571C7EA2EDB 0b032432ef7d5bb21e650ae403f9e41619fd2af2ad277cfdaf61fca533d36bfc 21bd5456-d973-11ef-b232-0050569b8976 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=198553 Biotehniška fakulteta Meritve in testi 0 0 0