20.500.12556/RUL-158328 Visualization of inclusions in a water model for continuous casting of steel With the water model, we experimentally confirmed the possibility of using a suspension to imitate the molten casting powder (slag) at the upper edge of the melt during the continuous casting of steel. The project requires that the slag particles do not leave the suspension layer during operation or that they return to it from the molten steel. It turns out that this is possible if the selected suspension particles mimic sufficiently large inclusions in the real system. The imitation of slag particles in a real system with suspension particles in water model is ensured by the equal terminal flotation velocities of both. Among the discussed polyethylene and cork particles, only cork particles, with a size of 0.2 mm to 0.5 mm, and a density of around 400 kg/m3, meet this condition. It was shown that the presented methodology could be used to estimate the proper position of the submerged entry nozzle. modeling continuous casting of steel CFD turbulence modeling meshless methods modeliranje kontinuirno ulivanje jekla računalniška dinamika tekočin modeliranje turbulence brezmrežna metoda true false true Angleški jezik Slovenski jezik Neznano 2024-06-05 14:11:42 2024-06-05 14:11:45 2025-04-21 11:45:23 0000-00-00 00:00:00 2024 0 0 6 str. Vol. 2766, art. 012084 2024 0000-00-00 Zaloznikova Objavljeno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 519.62:621.74 1742-6596 10.1088/1742-6596/2766/1/012084 197875459 197654787 Perpar...-Visualization_of_inclusions_in_a_water_model_for_continuous_casting_of_steel.pdf Perpar...-Visualization_of_inclusions_in_a_water_model_for_continuous_casting_of_steel.pdf 1 F3F662191F6C1AEB74F868AAC93E68F3 cf16e436e2bf1bd261f460bc9f063ad93bbec80d68fd68539a933d9fd676ace4 272d71c2-2335-11ef-b111-0050569b8976 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=185901 https://iopscience.iop.org/article/10.1088/1742-6596/2766/1/012084 1 c775c2c4-2334-11ef-b111-0050569b8976 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=185900 Fakulteta za strojništvo 0 0 0