20.500.12556/RUL-143459 Expansion of the dynamic strain field in 3D-printed structures using a hybrid modeling approach The 3D printing of machine components is becoming an established technique. To ensure their robustness and longevity, it is crucial to numerically predict the dynamic response of these components in a variety of operating conditions. Dynamic properties are conventionally obtained in the form of displacement or strain-based response models. However, numerical modeling of the dynamic properties of 3D-printed structures can be a tedious task, mainly due to the complex geometry of the infill pattern and the influence of the printing parameters on the material and geometric properties. Alternatively, the dynamic properties can also be represented in the form of an experimental response model. This reflects the real dynamic properties, but is usually subject to measurement errors and has a low spatial resolution. To integrate the benefits of numerical and experimental response models, we propose a hybrid modeling approach with the System Equivalent Mixing method. The method was extended to a form that could integrate dynamic response models with different physical quantities (displacement and strain). The approach was then analyzed on a 3D-printed beam with a complex infill pattern, where an accurate expansion of the strain response to a high spatial resolution was demonstrated. full-field strain response expansion process PVDF strain sensors 3D print modal analysis frequency response function polje specifičnih deformacij razširitveni proces merilna zaznavala 3D tisk modalna analiza frekvenčna prenosna funkcija true false true Angleški jezik Slovenski jezik Članek v reviji 2022-12-21 13:07:18 2022-12-21 13:07:23 2022-12-22 03:39:33 0000-00-00 00:00:00 2023 0 0 10 str. Vol. 206, art. 112339 Jan. 2023 0000-00-00 PostprintKoncna Objavljeno NiDoloceno 0000-00-00 0000-00-00 2024-12-10 004.925.84:510.643.5 0263-2241 10.1016/j.measurement.2022.112339 134914563 kodric,_cepon,_Boltezar-Expansion_of_the_dynamic_strain_field_in_3D-printed_structures_using_a_hybrid_modeling_approach.pdf kodric,_cepon,_Boltezar-Expansion_of_the_dynamic_strain_field_in_3D-printed_structures_using_a_hybrid_modeling_approach.pdf 1 8454571203202282C31C66AA6349D8EF efab4e91da364f345c83e54b8f1796ad3c12091da0a926f942e6e9bc153cd762 51ddba8a-8128-11ed-9c94-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=165173 https://www.sciencedirect.com/science/article/pii/S0263224122015354 1 d71d93f8-8127-11ed-9c94-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=165172 Fakulteta za strojništvo 0 0 0