20.500.12556/RUL-143250 Production of the design developed to assembly filter parts, optimization of welding and field test Konstruiranje filtrov za montažo, optimizacija varjenja in terenski preizkusi For the joining of non-removable plastic parts, methods such as friction welding, friction-stir welding, ultra-sonic welding, chemical joining, and hot-plate welding are used. Rotary friction welding is generally used for joining the filter parts of water treatment devices. After the rotating friction welding of the filter parts, semi-melted agglomerations are formed in the inner parts. To prevent semi-melted accumulation, a weld joint profile design was developed in the ABAQUS software in a previous study. In this study, injection moulds had been produced according to weld joint profile design. The taken plastic presses were welded with the friction welding machine and the joint was controlled and compared. It is seen that the semi-melted agglomeration was successfully confined. By performing Taguchi experimental method and ANOVA analysis on friction welding machine parameters, the optimum pressure conditions were determined in order to carry out static and dynamic tests according to NSF standards and field tests by producing 1500 pilot products, and it has been put into use. The lifetime of the developed filter depends on the material which was used in the manufacture. The next study is aimed to improve the lifetime of the developed filters. rotary friction welding taguchi experimental method ANOVA analysis semi-melt agglomerations NSF water purification field test static testing dynamic testing rotacijsko varjenje z gnetenjem eksperimentalna metoda po Taguchiju analiza ANOVA kopičenje delno raztaljenih delcev čiščenje vode NSF analiza po metodi končnih elementov terenski preizkus statično preizkušanje dinamično preizkušanje true false true Angleški jezik Slovenski jezik Članek v reviji 2022-12-09 09:14:18 2022-12-09 09:14:22 2022-12-10 03:51:19 0000-00-00 00:00:00 2022 0 0 Str. 657-668 no. 11 Vol. 68 Nov. 2022 0000-00-00 Zaloznikova Objavljeno NiDoloceno 0000-00-00 0000-00-00 2022-11-01 621.791 0039-2480 10.5545/sv-jme.2022.255 133048835 Maden,_Çetinkaya-_Production_of_the_design_developed_to_assembly_filter_parts,_optimization_of_welding_and_field_test.pdf Maden,_Çetinkaya-_Production_of_the_design_developed_to_assembly_filter_parts,_optimization_of_welding_and_field_test.pdf 1 C1A2CD2807E4708EF4965FB9B88BEFBF a1a860443259432863e6fe79917ce65c46b2d95832c4498d9dac4c3018aba85d 7dda0fd9-7799-11ed-9c94-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=164873 https://www.sv-jme.eu/sl/article/production-of-the-design-developed-to-assembly-filter-parts-optimization-of-welding-and-field-test/ 1 547002ec-7799-11ed-9c94-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=164872 Fakulteta za strojništvo Strojniški vestnik 0 0 0