20.500.12556/RUL-140188 Kontrola zobnikov z uporabo 3D skeniranja Gear control using 3d scanning Tema predstavljene diplomska naloge je kontrolo polimernih zobnikov z uporabo 3D skeniranja. Obravnavan zobnik je bil izdelan s 3D tiskom in kasneje skeniran z obtičim skenerjem. Pridobljena trikotna mreža zobnikov je bila analizirana s programom, ki je bil razvit v laboratoriju LeCAD, za namen kontrole zobnikov. Končni rezultat vrednotenja je pokazal, da je metoda primerna za kontrolo zobnikov. Največjo napako končnim rezultatom je prispevala metoda izdelave zobnikov. The topic of the presented thesis is the control of polymer gears using 3D scanning. The gear in question was produced with 3D printing and later scanned with a 3D scanner. The obtained triangular mesh of gears was analyzed with a program developed in the LeCAD laboratory for the purpose of gear control. The final result of the analyzes showed that the method is suitable for gear control. The most significant error in the final results was contributed by the manufacturing method of the gears. kontrola zobnikov polimerni zobniki 3D tiskanje 3D skeniranje trikotna mreža gear control polymer gear 3D printing 3D scanning triangular mesh true false false [K. Cvahte] Slovenski jezik Angleški jezik Zaključna naloga 2022-09-13 08:30:43 2022-09-13 08:30:46 2022-09-30 10:14:20 0000-00-00 00:00:00 2022 0 Ljubljana 0 XVI, 52 f. 0000-00-00 NiDoloceno NiDoloceno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 004.925.84:621.79(043.2) 244838 123665667 18929.pdf 18929.pdf 1 D5040009DE1D01077DD8D09FB90B2392 ebd855296e9645ebeaaf0e56604bf97d686de15132e01a033fccc770fdb9afe4 89847fac-332d-11ed-92af-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=160876 Fakulteta za strojništvo 0 0 0