20.500.12556/RUL-128250 Studying the performance of cutting carbon fibre-reinforced plastic using an abrasive water jet technique Študija učinkovitosti rezanja plastike, ojačene z ogljikovimi vlakni, z abrazivnim vodnim curkom In recent years, composite materials such as carbon-fibre-reinforced plastic (CFRP) have been widely used in medical devices, industries, marine and aerospace applications due to their high resistance-to-weight ratio toughness, corrosion resistance, and other novel properties. The machining of these composite materials using conventional machines results in poor precision and surface finishing due to excess heat generation at the tool-material contact zone. The drawbacks of the conventional machining process can be overcome with the adoption of a novel cutting technique using pressurized water, which can dissipate the heat generated by the impact of abrasive particles against the material in order to eliminate the poor precision and surface finishing caused by overheating. In this experimental study, the performance of surface quality (roughness and kerf angle) of CFRP machining using an abrasive water jet technique has been studied for a wide range of cutting parameters, such as water pressure and cutting speed. composite materials CFRP abrasive water jet surface quality roughness kerf angle kompozitni materiali CFRP rezanje abrazivni vodni curek kakovost površin hrapavost kot reže true false true Angleški jezik Slovenski jezik Članek v reviji 2021-07-07 11:40:23 2021-07-07 11:40:28 2022-09-07 04:13:58 0000-00-00 00:00:00 2021 0 0 Str.125-141 no. 4 Vol. 67 Apr. 2021 0000-00-00 Zaloznikova Objavljeno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 621.9.04:678 0039-2480 10.5545/sv-jme.2021.7141 69560067 RAZ_Hussien_Ahmed_A._2021.pdf RAZ_Hussien_Ahmed_A._2021.pdf 1 26C9764C5FE99D38FFBAAE824E95E64F da64551aabe841aa00759163c62d4138e622853eb1092663f0cb822fcca971a7 ac86d25b-df07-11eb-a523-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=144923 https://www.sv-jme.eu/sl/article/studying-the-performance-of-cutting-carbon-fiber-reinforced-plastic-using-abrasive-water-jet-technique/ 1 3c9bd030-df07-11eb-a523-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=144922 Fakulteta za strojništvo Strojniški vestnik 0 0 0