20.500.12556/RUL-127112 Uncertainty of the electrode wear on-machine measurements in micro EDM milling On-machine measurements play an important role in micro EDM milling. The measured tool electrode wear and the wear compensation have a strong influence on machining accuracy since the wear compensation methods require periodic measurements of the wear. The measurement uncertainties of the linear and volumetric wear measurements by the Touch and the Laser method were examined and results are presented in this paper. It was found that the linear wear measurements can be effectively performed by the Touch method when larger tool electrode diameters are used and sufficient machining is performed between the two control intervals, whereas the volumetric wear should be measured by the Laser method. To effectively compensate the tool electrode wear when tool electrodes with smaller diameters are used or low linear tool wear occurs between the two control intervals, the Laser method should be applied. micro EDM milling wear compensation on-machine measurement (OMM) uncertainty mikro elektroerozijsko dolbenje kompenzacija obrabe elektrode meritve na stroju merilna negotovost true false true Angleški jezik Slovenski jezik Članek v reviji 2021-05-18 12:53:48 2021-05-18 12:53:51 2022-09-06 03:49:48 0000-00-00 00:00:00 2021 0 0 Str. 153-160 Vol. 64 Apr. 2021 0000-00-00 Zaloznikova Objavljeno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 531.7:621.3.03(045) 1526-6125 10.1016/j.jmapro.2021.01.021 49498115 RAZ_Valentincic_Josko_2021.pdf RAZ_Valentincic_Josko_2021.pdf 1 9F656E6267F7708EEB7E37F1A9165C60 34ce87550be0002ebc4d7250fc7dcee1cdfdf043663e8f1378ad5e585a86ccfa 85329496-b7c8-11eb-a523-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=143340 https://www.sciencedirect.com/science/article/pii/S1526612521000402 1 493f41dc-b7c7-11eb-a523-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=143339 Fakulteta za strojništvo 0 0 0