20.500.12556/RUL-125233 Selection of the most suitable material handling system in production When building a new company or optimising an existing one, material handling (MH) is often forgotten. Therefore, the paper presents a decision tree, on the basis of which it is possible to select the most suitable MH system by simulation depending on the selected production parameters. Such a simulation can greatly facilitate the selection of the most suitable MH system which will ensure minimal time consumption and still acceptable costs. To perform the simulation, a generalised production system model for 5 different MH systems was created in the FlexSim software, with which 32 different scenarios could be simulated depending on the selected production parameters, tested in a production facility of injection moulded components for the automotive industry. The data obtained from the simulations were then used to analyse the influence of the selected parameters on possible MH systems. For all potential scenarios, the solutions of which are acceptable for MH, a cost-benefit analysis was performed. Based on the analysis, a difference of 75 % between the most and least favourable scenarios was established. production material handling systems simulation optimisation cost-benefit analysis proizvodnja rokovanje z materialom simulacija optimizacija analiza koristi analiza stroškov true false true Angleški jezik Slovenski jezik Članek v reviji 2021-03-09 13:30:05 2021-03-09 13:30:08 2022-09-05 03:50:00 0000-00-00 00:00:00 2021 0 0 Str. 64-75 no. 1 Vol. 20 Mar. 2021 0000-00-00 Zaloznikova Objavljeno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 658.2/.5(045) 1726-4529 10.2507/IJSIMM20-1-542 54449411 8008982 RAZ_Berlec_Tomaz_2021.pdf RAZ_Berlec_Tomaz_2021.pdf 1 D73CD28A4A8B9B288576A4B6E874C95C 97abe7f1bc07ffb399c76493e969db99018877263b450d752a406847b4d6715e aef5c874-a1bb-11eb-a523-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=140906 Fakulteta za strojništvo 0 0 0