20.500.12556/RUL-121289 CNC machining of large FRPC parts employing workpiece localization and toolpath adaptation In large fiber-reinforced polymer composite (FRPC) parts manufacturing curing process causes residual stresses in the material, which tend to deform the part after demolding. The geometry variability and the positioning variability on the machine table need to be measured and the toolpath adopted before machining. This requires part positioning within narrow tolerances. The availability of optical measuring devices has facilitated the exact part geometry and location measurement directly on the machine table. This study aims to implement the measurement on the machine table, localization in the machine coordinate system and toolpath generation based on the measured surface profile. The proof of concept was performed in a case of a large FRPC part manufacturing for wind industry. surface profile CNC machining toolpath profil površine FRPC pot orodja true false true Angleški jezik Slovenski jezik Članek v reviji 2020-10-02 12:39:56 2020-10-02 12:40:00 2022-09-02 03:58:46 0000-00-00 00:00:00 2020 0 0 Str. 1394-1398 Vol. 93 2020 0000-00-00 Zaloznikova Objavljeno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 658.5(045) 2212-8271 10.1016/j.procir.2020.04.113 30860291 30177283 RAZ_Selak_Luka_2020.pdf RAZ_Selak_Luka_2020.pdf 1 1477618223BDE3C080BA6E4C351FAE2D 8d30344583fa22ffd54ecb27b8d4e01a36162da8c81212c864b3392814eba012 cd6c2f7f-a1ba-11eb-a523-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=136198 https://www.sciencedirect.com/science/article/pii/S2212827120307484#! 1 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=136197 Fakulteta za strojništvo 0 0 0