20.500.12556/RUL-119338
Termokromni polimeri in vpliv 3D tiska termokromne polilaktične kisline na mehanske lastnosti izdelka
Termochromic polymers and the effect of 3D printing of thermochromic polylactic acid on mechanical properties
Termokromizem je reverzibilen pojav, ki pri segrevanju ali ohlajanju temelji na spremembi barve snovi. Termokromno barvilo je dodano polimerom, ki se lahko pojavljajo kot termoplasti, elastomeri ali v obliki premazov. S svojo barvno spremembo se lahko termokromni materiali uporabljajo kot pokazatelji temperaturnih razlik pri skladiščenju nevarnih snovi, pakiranju živil, kot senzorji mehanskih obremenitev, regulatorji prepustnosti svetlobe in še v mnoge druge namene.
Zaključna naloga obsega proučevanje vpliva 3D tiskanja termokromnega polimera PLA na njegove mehanske lastnosti. Proučevali smo vpliv temperature tiskanja na hitrost spremembe termokromne reakcije, vpliv UV svetlobe na termokromno reakcijo v 3D tiskanem polimeru, vpliv nateznega obremenjevanja materiala na spremembo barve polimera, vpliv temperature na viskoznost termokromnega polimera PLA ter termične lastnosti termokromnega PLA (DSC meritve).
Ugotovili smo, da temperatura tiska vpliva na mehanske lastnosti polimera, da UV svetloba uniči termokromni mehanizem v polimeru, ter da se viskoznost polimera s poviševanjem temperature znižuje. Določili smo točko steklastega prehoda, temperaturo kristalizacije ter točko taljenja komercialnega termokromnega polimera.
Thermochromism is a reversible phenomenon based on a change in the color of the substance, depending on whether the substance is heated or not. Thermochromic dye is added to polymers, which can appear as thermoplastics, elastomers or in the form of coatings. With their color change, they can be used as indicators of temperature differences in the storage of hazardous substances, food packaging, mechanical load sensors, light transmittance regulators and for many other purposes.
In this study we investigated the influence of 3D ptinting of thermochromic polymer PLA on its mechanical properties. We studied the influence of printing temperature on the rate of change of thermochromic reaction, the influence of UV light on thermochromic reaction in 3D printed polymer, the influence of tensile loading of material on polymer color change, the influence of temperature on viscosity of thermochromic polymer PLA and thermal properties of thermochromic PLA.
The results showed that the printing temperature affects the mechanical properties of the polymer, moreover UV light destroys the thermochromic mechanism in the polymer, and the viscosity of the polymer decreases with increasing temperature. Thermal characterization enabled the determination of the glass transition, crystallization and melting point of the polymer.
polimeri
termokromizem
3D tiskanje
PLA (polilaktična kislina)
viskoznost
polymers
thermochromism
3D printing
PLA (polylactic acid)
viscosity
true
false
false
[A. Klemenc]
Slovenski jezik
Angleški jezik
Zaključna naloga
2020-09-08 08:31:31
2020-09-08 08:31:35
2023-11-14 12:53:33
0000-00-00 00:00:00
2020
0
Ljubljana
0
XIII, 45 f.
0000-00-00
NiDoloceno
NiDoloceno
NiDoloceno
0000-00-00
0000-00-00
0000-00-00
678.7:544.164.032.4:621.9.04(043.2)
223709
28829443
6010.pdf
6010.pdf
1
4FBFF4F10DC450C57A10729AD195012C
1d3d695ac67364b5fbf2430be480f794aca61c86e7699226d021eb715a529db8
cc9f0e58-a1b9-11eb-a523-00155dcfd717
https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=134037
Fakulteta za strojništvo
0
0
0