Numerično modeliranje dodajanja materiala
V okviru te zaključne naloge je obravnavano numerično modeliranje toplotnih problemov po metodi končnih elementov. Najprej so predstavljene potrebne enačbe in postopki za numerično modeliranje toplotnih problemov v splošnem. V nadaljevanju je prikazana analiza preprostega problema ustaljenega prevoda toplote na hladilnem rebru po korakih. Sledi primerjava rezultatov lastnega programa z rezultati pridobljenimi z uporabo komercialne programske opreme Abaqus. V drugem delu zaključne naloge je metoda končnih elementov uporabljena za toplotno analizo dodajanja materiala s pretaljevanjem. Prikazane in ovrednotene sta dve metodi numeričnega modeliranja dodajanja materiala v programskem okolju Abaqus.
This final work discusses numerical modelling of the thermal problems using the finite element method. At the beginning, the needed equations and methods for the numerical modelling of the thermal problems in general are explained. In addition, we presented the analysis of the stationary heat transfer problem in steps. This is followed by the comparison of the results of our own computer code with the results, which we got from the use of the Abaqus computer code. In the second part of the final work we used the finite element method for the heat analysis of adding the material with melting. We presented and evaluated two methods of numerical modelling of adding the material in the Abaqus computer code.
2019
2019-07-17 07:45:26
1060
numerično modeliranje, metoda končnih elementov, dodajanje materiala, toplotni problemi, toplotne analize, prevod toplote
numerical modelling, finite element method, adding materials, thermal problems, thermal analysis, heat transfer
mb12
[D. Kovšca]
Dejan
Kovšca
70
Nikolaj
Mole
991
UDK
4
536.24:004.942:519.61(043.2)
VisID
16
213353
COBISS_ID
3
16731419
3715.pdf
3387065
Predstavitvena datoteka
2019-07-17 07:45:29