20.500.12556/RUL-105269 Bolted connection of an end-plate cantilever beam the distribution of operating force This paper presents an alternative method for calculating the operating forces on bolts in the bolted connections of the end-plate cantilever beams. Since operating force reduces pressure between the joined surfaces the influence of the operating force needs to be considered when determining the clamping force. Therefore, correctly defined operational force on each bolt is a base for all further calculations. To evaluate proposed method, results of four existing analytical methods for calculating the operating forces in the bolted connections of the end-plate cantilever beams are compared with the results of the alternative method and the results gained by finite element analyses. Because finite element analysis take into account all influential parameters it is expected that the results obtained by finite element analyses are a good approximation to reality and can serve as a reference when comparing different analytical methods. It turns out that the results of the proposed method coincide with the results of finite element analyses the most. Only the proposed method correctly determines which bolts in the connection are subjected to the highest additional loads. bolted connection endplate connections operating force bolt pretension structural steel finite element method vijačna zveza prirobnični spoji delovna sila prednapeti vijaki konstrukcijsko jeklo MKE true false true Angleški jezik Slovenski jezik Podatek o licenci CC BY 4.0 je naveden na pristajalni strani članka – glej izvorni URL zgoraj. (Datum opombe: 21. 5. 2025) Članek v reviji 2018-11-19 08:30:22 2018-11-19 08:30:26 2025-05-21 16:33:41 0000-00-00 00:00:00 2017 0 0 Str. 617-627 iss. 11 Vol. 63 2017 0000-00-00 Zaloznikova Objavljeno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 621.88:624.014.2(045) 0039-2480 10.5545/sv-jme.2017.4638 15744795 762116 RAZ_Oman_Simon_i2017.pdf RAZ_Oman_Simon_i2017.pdf 1 E4BFE4B065D50133046EBD6B0558814C c1a2688ec22ad72d6e81dbcbea88815c8c4de1e0b4b5e0f7662ad71ec8ad2411 27e2edc0-a1b6-11eb-a523-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=115891 https://www.sv-jme.eu/article/bolted-connection-of-an-end-plate-cantilever-beam-the-distribution-of-operating-force/ 0 56c1c401-364e-11f0-b232-0050569b8976 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=210546 Fakulteta za strojništvo Strojniški vestnik 0 0 0