20.500.12556/RUL-101994 Analiza delovanja aksialne zobniške črpalke na osnovi zvoka in vibracij Analysis of working of axial gear pump on the basis of sound and vibrations V zaključni nalogi obravnavamo delovanje aksialne zobniške črpalke na osnovi zvoka in vibracij do katerih prihaja med samim delovanjem. Zvok in vibracije so med seboj povezane preko akustičnega volumskega pretoka, ki se ustvari s premikanjem sevalne površine. Tako lahko z merjenjem ene veličine preko analizo pridemo do druge. Navadno najprej merimo hrup, in s pravilno analizo preidemo do vibracije površin, saj sta zvočni tlak in hitrost vibracij linearno povezani veličini. Pri obravnavani črpalki smo hoteli ugotoviti, zakaj nekatere izmed črpalk delujejo slabše. Primerjali smo merjeni hrup in vibracije črpalk z nedeformiranimi črpalnimi rotorji in z različno intenzivno deformiranimi črpalnimi rotorji. Izkazalo se je, da že minimalna deformacije rotorja poruši celoten obrat črpalnega rotorja, zato rotor deluje zelo nestabilno, puščanje pa je večje. Pri meritvah je opaziti, da črpalke z nedeformiranimi rotorji delujejo precej različno ter imajo različne hitrosti vibracij površin. Obravnavan je tudi kot naleganja črpalnega rotorja na črpalni stator, ki se izkaže za ključnega pri delovanju. In the final assignment, we deal with the operation of the axial gear pump on the basis of sound and vibrations which occur during the operation. Sound and vibrations are interconnected through the acoustic volume flow which is created by moving the radiating surface. Thus, we can come to the second size by measuring the first one through the analysis. Usually, we first measure the noise. We pass over to the vibrations of the surfaces by the appropriate analysis, for the sound pressure and the velocity of vibrations are linearly connected sizes. In the case of the studied pump, we wished to ascertain why some of the pumps operated worse. We compared the measured noise and vibrations of the pumps by undeformed pumping rotors and by differently intensive deformed pumping rotors. It turned out that minimal deformation of the rotor disturbs the entire turn of the pumping rotor. Therefore, the rotor operates very unstable and the leaking increases. It can be seen in measurements that pumps with the undeformed rotors operate pretty differently and perform different velocities of the vibrations of surfaces. The angle of the abutment of the pumping rotor to the pumping stator, which turns out to be essential in the process of operation, is also dealt with. zvok vibracije zobniške črpalke delovanje črpalk meritve sound vibrations gear pumps pump operation measurements true false false [S. Trček] Slovenski jezik Angleški jezik Diplomsko delo/naloga 2018-07-19 07:45:20 2018-07-19 07:45:23 2023-11-20 12:31:59 0000-00-00 00:00:00 2018 0 Ljubljana 0 XV, 41 str. 0000-00-00 NiDoloceno NiDoloceno NiDoloceno 0000-00-00 0000-00-00 0000-00-00 621.664:534.6(043.2) 205620 16186139 1915.pdf 1915.pdf 1 E6FC97E9BF132BB73EFBB16675CD2169 457b0ef38f9cc9b36c63e0d8d2b82c3dfd38b93804b01fb446ab83da91377995 7a052124-a1b5-11eb-a523-00155dcfd717 https://repozitorij.uni-lj.si/Dokument.php?lang=slv&id=112288 Fakulteta za strojništvo 0 0 0