Multiparametric evaluation of a magnetic field source for thermomagnetic generatorGimaev, Radel (Avtor) Kitanovski, Andrej (Avtor) Klinar, Katja (Avtor) thermomagneticmagnetic field sourcewaste heatmagnetic energy conversionheat transfermagnetocaloricgeneratorsThermomagnetic generators (TMGs) represent a promising solid-state technology for low-grade waste heat recovery. While extensive research has addressed working materials and heat transfer optimization, systematic analysis of magnetic field source design in TMGs remains underexplored. This study presents a parametric finite element analysis of the magnetic field source in a TMG. Magnetostatic and transient simulations were performed to evaluate the effects of permanent magnet (PM) material (neodymium-iron-boron [NdFeB], Alnico, and Ferrite), its dimensions, and air gap width, on the TMG output power and specific power. It is shown that reducing PM thickness yields a substantial gain in specific power output per PM mass, while an increased air gap can be maintained without significant effects on output power. The study also investigates Alnico PM as a sustainable, rare-earth-free alternative. These findings contribute to the development of mass-optimized and cost-effective thermomagnetic energy harvesters.20262026-08-28 09:53:16Članek v reviji186209UDK: 536.24:537.63ISSN pri članku: 2589-0042DOI: 10.1016/j.isci.2026.117367COBISS_ID: 289224451sl