3D sound radiation reconstruction from camera measurementsBaldini, Sofia (Avtor) Guernieri, Gianluca (Avtor) Gorjup, Domen (Avtor) Gardonio, Paolo (Avtor) Slavič, Janko (Avtor) Rinaldo, Roberto (Avtor) videogrammetryflexural vibration measurementsound radiation reconstructionfrequency-domain triangulationIn general, the measurement of the sound radiation field by machinery and partitions requires time-consuming tests, which should be carried out in specially dedicated anechoic/reverberant facilities with calibrated sensors and complex acquisition and post processing equipment. This article introduces a two-step method for the identification from optical measurements of the free- field sound radiation generated by flexural vibrations of closed shells. In the first step, the flexural vibration of the shell is reconstructed with a frequency domain triangulation technique based on short multi-view video acquisitions made with a single high-resolution, high-speed camera. In the second step, the free-field sound radiation is derived from a discretized boundary integral formulation. The study is focused on the identification of the sound radiation from the flexural vibration of a baffled cylinder model structure. The vibration and sound fields reconstructed from the camera measurements are validated against direct measurements taken with a laser scanner vibrometer and a microphone array, respectively. Overall, this research demonstrates that optical methods based on camera measurements can be suitably employed to produce fast and accurate full-field measurements of sound radiation of closed shells (without the need for a dedicated measurement environment, e.g. reverberant, anechoic chambers).20252025-02-07 09:49:26Članek v reviji167086UDK: 534.83ISSN pri članku: 1096-1216DOI: 10.1016/j.ymssp.2025.112400COBISS_ID: 225020931slPodatek o licenci je pridobjen s strani avtorja in objavljen na založnikovi spletni strani.