<?xml version="1.0"?>
<metadata xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:dc="http://purl.org/dc/elements/1.1/"><dc:title>A new sum-channel radiating element for a patch-monopole monopulse feed</dc:title><dc:creator>Miklavčič,	Peter	(Avtor)
	</dc:creator><dc:creator>Batagelj,	Boštjan	(Avtor)
	</dc:creator><dc:subject>wireless communications</dc:subject><dc:subject>monopulse antenna</dc:subject><dc:subject>multimode antenna</dc:subject><dc:subject>prime-focus feed</dc:subject><dc:subject>circularly-polarized patch</dc:subject><dc:description>This article describes a new design for the sum-channel, circularly-polarized, radiating patch element of a multimode patch-monopole monopulse feed. Such feeds are suitable for the prime-focus illumination of a deep symmetric reflector. A relatively simple and compact feed design allows for a compact single-mirror antenna with monopulse tracking. The feed is about a wavelength in diameter, also making it suitable for illuminating smaller antennas, for example, in LEO-satellite ground (client) stations. The design applies a slotted circular patch as a circularly-polarized sum-channel element. The design variables are optimized mainly for the sum-channel aperture illumination efficiency in an S-band satellite ground station. After a few cut-and-try iterations, the final feed prototype was produced and measured. In addition to an additional degree of freedom in the geometry and potentially easier fabrication, the new sum-channel radiating-element shape allows for a slightly better monopulse channel isolation, and a higher radiation-pattern symmetry compared to the previous design.</dc:description><dc:date>2024</dc:date><dc:date>2024-08-12 13:44:34</dc:date><dc:type>Članek v reviji</dc:type><dc:identifier>160052</dc:identifier><dc:identifier>UDK: 621.39</dc:identifier><dc:identifier>ISSN pri članku: 2079-9292</dc:identifier><dc:identifier>DOI: 10.3390/electronics13163187</dc:identifier><dc:identifier>COBISS_ID: 204164355</dc:identifier><dc:language>sl</dc:language></metadata>
