Design of organic cathode material based on quinone and pyrazine motifs for rechargeable lithium and zinc batteriesMenart, Svit (Avtor) Lužanin, Olivera (Avtor) Pirnat, Klemen (Avtor) Pahovnik, David (Avtor) Moškon, Jože (Avtor) Dominko, Robert (Avtor) organic cathodepyrazinequinonecatecholLi−organic batteryZn−organic batteryaqueous electrolytebatterieselectrodeselectrolytesmaterialsstabilityDespite the rapid expansion of the organic cathode materials field, we still face a shortage of materials obtained through simple synthesis that have stable cycling and high energy density. Herein, we report a two-step synthesis of a small organic molecule from commercially available precursors that can be used as a cathode material. Oxidized tetraquinoxalinecatechol (OTQC) was derived from tetraquinoxalinecatechol (TQC) by the introduction of additional quinone redox-active centers into the structure. The modification increased the voltage and capacity of the material. The OTQC delivers a high specific capacity of 327 mAh g$^{−1}$ with an average voltage of 2.63 V vs Li/Li$^+$ in the Li-ion battery. That corresponds to an energy density of 860 Wh kg$^{−1}$ on the OTQC material level. Furthermore, the material demonstrated excellent cycling stability, having a capacity retention of 82% after 400 cycles. Similarly, the OTQC demonstrates increased average voltage and specific capacity in comparison with TQC in aqueous Zn−organic battery, reaching the specific capacity of 326 mAh g$^{−1}$ with an average voltage of 0.86 V vs Zn/Zn$^{2+}$. Apart from good electrochemical performance, this work provides an additional in-depth analysis of the redox mechanism and degradation mechanism related to capacity fading.20242024-07-23 15:37:59Članek v reviji159759UDK: 544.5/.6ISSN pri članku: 1944-8252DOI: 10.1021/acsami.3c16038COBISS_ID: 201905923sl