Model-based design of continuous biotransformation in a microscale bioreactor with yeast cells immobilized in a hydrogel filmMenegatti, Tadej (Avtor) Plazl, Igor (Avtor) Žnidaršič Plazl, Polona (Avtor) microreactormathematical modelimmobilizationwhole-cell biocatalysiscontinuous biotransformationtime-scale analysisMiniaturized flow reactors with immobilized biocatalysts offer enormous potential for process intensification. They enable long-term use of biocatalysts, continuous operation that significantly exceeds the performance of batch processes, and efficient mass and heat transfer leading to highly controlled reaction conditions. Despite their increasing use in biocatalytic processes, optimization of reactor design and operating conditions based on a mathematical description is very rare. This work aims to fill this gap by developing and validating a mathematical model for the continuous biotransformation process in a microreactor between two plates with immobilized whole cells in hydrogel layers on the bottom and top of the reactor. A biocatalytic production of L-malic acid by fumaric acid hydration using permeabilized Saccharomyces cerevisiae whole cells was used as a model reaction. The diffusivity of substrate and product in a liquid phase and in a copolymer hydrogel layer, as well as the reaction kinetic parameters considering the Michaelis-Menten kinetics of the reversible enzymatic reaction, were estimated in initial batch experiments. The results obtained in a continuously operated microbioreactor with immobilized whole cells at different fumaric acid concentrations and flow rates were in excellent agreement with the predictions of the developed mathematical model encompassing transport phenomena and reaction kinetics. Based on the validated model and using time scale analysis with characteristic times, the optimal process and operating conditions for the developed microbioreactor system were determined. By reducing the channel thickness to 200 um and increasing the gel thickness to 900 microns, we were able to increase the complete conversion of the substrate with a residence time of less than 40 minutes.20232023-10-20 16:46:22Neznano151814sl