<?xml version="1.0"?>
<metadata xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:dc="http://purl.org/dc/elements/1.1/"><dc:title>Upgrade and modernization of a classical instrument</dc:title><dc:creator>BAVDEK,	BASTIJAN BALTAZAR	(Avtor)
	</dc:creator><dc:creator>Nemec,	Mitja	(Mentor)
	</dc:creator><dc:subject>digital wattmeter</dc:subject><dc:subject>power measurement</dc:subject><dc:subject>instrument upgrade</dc:subject><dc:subject>battery powered</dc:subject><dc:description>This report describes the process and accompanying findings of designing and developing a measuring device. The main intention and motivation for this project was to experience the whole process required for producing an electric device, and all possible problems an engineer might encounter. 
The task was to design and build a digital wattmeter and fit it in an existing wooden housing. The housing came from an old analog amperemeter, that wasn’t used anymore, but was seen as a good base for a modern device with a retro look. The project was envisioned by my mentor for the purpose of measuring high voltage and currents in the collage lab (LRTME). Taking in consideration that this is a first version, we wanted to create a good base for future iterations of the device and keep it relatively simple and functional.  
There were tree main requirements for the device. First it needed to be able to measure and display voltage up to 1000V and currents up to 50A, that would then be calculated into electric power. For better accuracy, measuring needed to be achieved in two measuring ranges, for both voltage and current, with automatic range switching. Second the device needed to be portable and battery powered. Charging would be done via USB Type-B connector from 5V / 500mA source, as it is the standard for this USB 2.0 connection power delivery. Finally all components needed to fit in the existing wooden housing with as little alterations of it as possible. In addition some components were predefined by the mentor (power button, display…), as they were easily available or would fit some specific needs.
All the measuring (direct and indirect), processing and calculations were handled by a microcontroller unit (MCU further in the text). The MCU was also defined by the mentor, as the lab was working with them already, and it was more than able to satisfy all the needs of the tasks at hand.
In this report it is first described how I approached the project from a more theoretical side, while taking into account possible future issues. In the upcoming chapters detailed working of the designed circuit will be addressed, as well as unexpected issues that appeared during assembly and testing. Finally, working of the finalized first version will be presented, accompanied with ideas for future improvement and second version, that emerged while designing and problem solving. The task provided me with a wholesome approach and problem solving skills, as it was comprised of multiple parts that needed to fit together.</dc:description><dc:date>2023</dc:date><dc:date>2023-04-19 11:50:00</dc:date><dc:type>Magistrsko delo/naloga</dc:type><dc:identifier>145369</dc:identifier><dc:identifier>VisID: 60021</dc:identifier><dc:identifier>COBISS_ID: 150247171</dc:identifier><dc:language>sl</dc:language></metadata>
