An analysis of the precision and reliability of the leap motion sensor and its suitability for static and dynamic trackingGuna, Jože (Avtor) Jakus, Grega (Avtor) Pogačnik, Matevž (Avtor) Tomažič, Sašo (Avtor) Sodnik, Jaka (Avtor) Leap Motion Controllermotion capture systemprecision measurementspatial distortion measurementWe present the results of an evaluation of the performance of the Leap Motion Controller with the aid of a professional, high-precision, fast motion tracking system. A set of static and dynamic measurements was performed with different numbers of tracking objects and configurations. For the static measurements, a plastic arm model simulating a human arm was used. A set of 37 reference locations was selected to cover the controller’s sensory space. For the dynamic measurements, a special V-shaped tool, consisting of two tracking objects maintaining a constant distance between them, was created to simulate two human fingers. In the static scenario, the standard deviation was less than 0.5 mm. The linear correlation revealed a significant increase in the standard deviation when moving away from the controller. The results of the dynamic scenario revealed the inconsistent performance of the controller, with a significant drop in accuracy for samples taken more than 250 mm above the controller’s surface. The Leap Motion Controller undoubtedly represents a revolutionary input device for gesture-based human-computer interaction; however, due to its rather limited sensory space and inconsistent sampling frequency, in its current configuration it cannot currently be used as a professional tracking system.20142021-08-30 15:51:18Članek v reviji129234UDK: 004.9:531ISSN pri članku: 1424-8220DOI: 10.3390/s140203702COBISS_ID: 10430036sl