Tehnološki postopek izdelave lesenih očal

Pušnik, Lan (avtor), Merhar, Miran (mentor)

V nalogi smo opisali tehnološki postopek izdelave lesenih okvirjev očal. Zaradi ergonomskih razlogov smo za obliko uporabili že obstoječ okvir iz umetnih materialov. Obliko smo prenesli v program SolidWorks s pomočjo opornih točk, ki smo jih povezali s funkcijo spline. Ker so bila očala ukrivljena, smo obris projicirali na ukrivljeno ploskev. Izrez okvirov smo sprogramirali v CAM programu SolidCam, obrezali pa smo jih na 3D CNC stroju. Očala smo izrezali iz ukrivljene vezane plošče, sestavljene iz 8 slojev furnirja ter 2 slojev ogljikovih vlaken. Uporabili smo bukov, javorjev, češnjev in hrastov furnir. Za izdelavo ukrivljene vezane plošče smo predhodno naredili kalup z želeno ukrivljenostjo. Na okvir in držala smo nato nanesli olje oziroma lazuro.

• Jezik: Slovenski jezik
• Ključne besede: lesena očala, tehnološki postopek, izdelava, SolidWorks, SolidCam
• Vrsta gradiva: Diplomsko delo/naloga
• Tipologija: 2.11 - Diplomsko delo
• Organizacija: BF - Biotehniška fakulteta
• Založnik: [L. Pušnik]
• Leto izida: 2017
• PID: 20.500.12556/RUL-95690
• UDK: 674.5
• COBISS.SI-ID: 2808201
• Datum objave v RUL: 21.09.2017

PUŠNIK, Lan, 2017, Tehnološki postopek izdelave lesenih očal [na spletu]. Diplomsko delo. L. Pušnik. [Dostopano 10 april 2025]. Pridobljeno s: https://repozitorij.uni-lj.si/IzpisGradiva.php?lang=slv&id=95690

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Technological Production Process of Wooden Glasses

Izvleček

In the thesis the technological process of wooden glasses production has been described. For the shape the preexisting glasses synthetic frame were used and a model in SolidWorks software was created using spline function, where the sketch was projected on a curved surface. The glasses frame was cut from the curved board using 3D CNC machine, where the path has been programmed using SolidCam software. The board was made of eight veneered and two carbon fiber layers, where beech, maple, cherry tree and oak veneer were used. To produce a curved plywood, a mold with desired curvature was made. At the end oil and wood lasure were applied on the frame and holders.

• Ključne besede: wooden glasses, technological process, production, SolidWorks, SolidCam