Avtomatsko konstruiranje z orodjem SolidWorks : diplomsko delo

JURŠE, PETER (avtor), Lotrič, Uroš (mentor)

Cilj diplomske naloge je bil avtomatizirati konstrukcijo proizvodnega izdelka v sistemu SolidWorks v povezavi s programom ciciVO, ki služi kot podporno orodje pri prodaji vgradnih omar. Izdelali smo dodatek za SolidWorks, ki iz projektne datoteke omenjenega programa pridobi informacije o določenem izdelku in s pomočjo teh zgradili njegov 3D-model v sistemu SolidWorks. V ta namen je bilo treba izdelati uporabniški vmesnik dodatka in napisati algoritem za gradnjo. Pri tem smo se morali sprehoditi skozi drevesno strukturo, opisano v projektni datoteki, in zgraditi enako strukturo v SolidWorksu. Na koncu je tako potreben le pritisk na gumb in v nekaj minutah je 3D-model pripravljen za proizvodnjo. Na ta način smo bistveno skrajšali proces od prodaje do proizvodnje naročenega izdelka, saj je bilo prej za enak, vendar ročni postopek potrebnih več ur dela.

• Jezik: Slovenski jezik
• Ključne besede: avtomatizacija, CAD, SolidWorks, proizvodnja, izdelek, vgradna omara, računalništvo, računalništvo in informatika, univerzitetni študij, diplomske naloge
• Vrsta gradiva: Diplomsko delo/naloga
• Tipologija: 2.11 - Diplomsko delo
• Organizacija: FRI - Fakulteta za računalništvo in informatiko
• Založnik: [P. Jurše]
• Leto izida: 2014
• Št. strani: 38 str.
• PID: 20.500.12556/RUL-29491
• COBISS.SI-ID: 1536093891
• Datum objave v RUL: 18.09.2014

Sekundarni jezik

• Jezik: Angleški jezik
• Naslov: Automating the construction in SolidWorks

Izvleček

The goal of this thesis was to automate the construction of manufacturing products in SolidWorks in connection with the ciciVO software that serves as a support tool in the sales of built-in closets. We have developed the SolidWorks add-in that obtains information about a particular product from the project file of the previously mentioned software and uses it to build its 3D model in SolidWorks. For this purpose we had to create a user interface for the add-in and programme the construction algorithm. This included going through the tree structure described in the project file and building the same structure in SolidWorks. In the end just a press of the button is required and in a few minutes the 3D model is ready for production. In this way, we have significantly shortened the process from the sale of the ordered product to production, as the similar manual process previously required several hours of work.

• Ključne besede: automation, CAD, SolidWorks, production, product, built-in closet, computer science, computer and information science, diploma