Additive manufacturing of NiTi shape memory alloys for elastocaloric applications : a review

Setiawan, Ignatius Andre (avtor), Mehrali, Mohammad (avtor), Tušek, Jaka (avtor), Mohajerani, Shiva (avtor), Wang, Xiebin (avtor), Brabazon, Dermot (avtor), Elahinia, Mohammad (avtor), Mehrpouya, Mehrshad (avtor)

The elastocaloric (eC) effect, which harnesses the latent heat released during stress-induced transformations of superelastic shape memory alloys (SMAs), offers a promising pathway toward solid-state, environmentally friendly refrigeration technologies. However, the advancement of eC devices is constrained by the limited heat transfer surface area between SMAs and heat transfer fluids, as well as the high mechanical work input relative to the extracted latent heat. Among available SMAs, nickel titanium (NiTi) alloys are the most widely commercialized and exhibit strong potential for eC applications, yet their poor machinability and fabrication challenges hinder widespread implementation. Additive manufacturing (AM) provides a solution by enabling layer-by-layer fabrication of NiTi with complex geometries, thereby enhancing surface area and reducing work input through lattice structures. This review summarizes recent progress in AM-fabricated NiTi for eC applications, with an emphasis on components produced by laser powder bed fusion (LPBF) and directed energy deposition (DED) techniques using both wire and powder feedstocks. Finally, future directions and opportunities for integrating AM NiTi into practical eC devices are discussed.

• Jezik: Angleški jezik
• Ključne besede: additive manufacturing, caloric materials, elastocaloric, shape memory alloys, solid state refrigeration, NiTi, elastocaloric cooling
• Vrsta gradiva: Članek v reviji
• Tipologija: 1.02 - Pregledni znanstveni članek
• Organizacija: FS - Fakulteta za strojništvo
• Status publikacije: Objavljeno
• Različica publikacije: Objavljena publikacija
• Leto izida: 2026
• Št. strani: 42 str.
• Številčenje: Vol. 36, iss. 46, art. e30524
• PID: 20.500.12556/RUL-185175
• UDK: 004.925.84:621.57
• ISSN pri članku: 1616-301X
• DOI: 10.1002/adfm.202530524
• COBISS.SI-ID: 286018051
• Datum objave v RUL: 27.07.2026

Gradivo je del revije

• Naslov: Advanced functional materials
• Skrajšan naslov: Adv. funct. mater.
• Založnik: Wiley Interscience
• ISSN: 1616-301X
• COBISS.SI-ID: 23502597

Licence

• Licenca: CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
• Povezava: http://creativecommons.org/licenses/by/4.0/deed.sl
• Opis: To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

• Jezik: Slovenski jezik
• Ključne besede: dodajalna proizvodnja, kalorični materiali, elastokaloričnost, materiali z oblikovnim spominom, hlajenje v trdnem stanju, NiTi, elastokalorično hlajenje