Podrobno

Experimental investigation of a vane probe blockage effect in a small wind tunnel
ID Bobovnik, Gregor (Avtor), ID Sambol, Peter (Avtor), ID Geršl, Jan (Avtor), ID Kutin, Jože (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (6,16 MB)
MD5: 508E1E4F789209AEA7BE6FFB2326CE34
URLURL - Izvorni URL, za dostop obiščite https://www.sciencedirect.com/science/article/pii/S0263224125032786?via%3Dihub Povezava se odpre v novem oknu

Izvleček
The blockage effect of a vane probe with a high blockage ratio is investigated in a small, open-circuit wind tunnel with a box-type test section. A laser Doppler anemometer is utilized to determine a reference air velocity. The study examines how different cross-sectional and axial positions of the vane probe in the test section affect the calibration results. The experiments were designed so that no access to the test section was required during individual test series, in which the probe was moved along a single direction within the test section. The results highlight the importance of the positioning of the vane probe, in particular the effect of insertion depth. The test results were also analysed in the context of literature-based uncertainty estimates related to blockage effects. Measurements of the velocity fields upstream of the vane probe showed that the points for the reference velocity measurement were in regions where the velocity disturbances caused by the vane probe were minimal. Comparative measurements conducted in a larger, closed-circuit wind tunnel revealed no systematic shifts directly attributable to the applied calibration procedure or blockage effects. With the aim of minimizing the blockage effects, the presented approach based on measurement of velocity perturbation fields allows a quali- tative assessment of the adequacy of selected reference velocity measurement points.

Jezik:Angleški jezik
Ključne besede:vane probe, laser doppler anemometer, wind tunnel, blockage effect, velocity perturbations, intercomparison
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:FS - Fakulteta za strojništvo
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2025
Št. strani:11 str.
Številčenje:Vol. 261, art. 119919
PID:20.500.12556/RUL-176657 Povezava se odpre v novem oknu
UDK:006.91:628.854.2
ISSN pri članku:1873-412X
DOI:10.1016/j.measurement.2025.119919 Povezava se odpre v novem oknu
COBISS.SI-ID:260334851 Povezava se odpre v novem oknu
Datum objave v RUL:08.12.2025
Število ogledov:111
Število prenosov:43
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Measurement
Založnik:Elsevier
ISSN:1873-412X
COBISS.SI-ID:23272709 Povezava se odpre v novem oknu

Licence

Licenca:CC BY 4.0, Creative Commons Priznanje avtorstva 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by/4.0/deed.sl
Opis:To je standardna licenca Creative Commons, ki daje uporabnikom največ možnosti za nadaljnjo uporabo dela, pri čemer morajo navesti avtorja.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:krilni anemometer, Laserski Dopplerjev anemometer, vetrovnik, zastojni učinek, perturbacije hitrosti, primerjava

Projekti

Financer:ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
Številka projekta:P2-0223
Naslov:Prenos toplote in snovi

Financer:Drugi - Drug financer ali več financerjev
Številka projekta:UTR 24E601501
Naslov:/

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj