Podrobno

Sandblasting wood as a technique of simulated weathering
ID Petrič, Marko (Avtor), ID Albreht, Luka (Avtor), ID Keržič, Eli (Avtor), ID Levanič, Jaka (Avtor), ID Pavlič, Matjaž (Avtor), ID Skerbiš, Jernej (Avtor)

.pdfPDF - Predstavitvena datoteka, prenos (5,42 MB)
MD5: 719CF0ADBC793A41C62D73D2B318472D
URLURL - Izvorni URL, za dostop obiščite https://www.mdpi.com/2076-3417/15/18/9919 Povezava se odpre v novem oknu

Izvleček
While most efforts are aimed at preventing the surface roughening and colour change of wood due to weathering, some customers, mainly for decorative reasons, want wooden objects and elements to give the impression that they have been weathered for a long time. In this study, the simulated weathering of numerous softwoods as well as ring-porous and diffuse-porous woods by sandblasting and greying with iron sulphate was investigated. Calculations of the correlations between wood density, orientation, mass loss and thickness reduction by sandblasting were performed, and the difference between the hardness of late and early wood and the surface profile parameter Pt showed that the surface profiles correlate strongly with mass loss, especially in the tangential orientation. Softwoods appeared to be the most promising for simulated profiling, especially spruce and larch with tangential surfaces. Among the ring-porous woods, oak and sweet chestnut also delivered good results.

Jezik:Angleški jezik
Ključne besede:softwood, ring-porous wood, diffuse-porous wood, sandblasting, artificial greying, primary profile, total height of the profile
Vrsta gradiva:Članek v reviji
Tipologija:1.01 - Izvirni znanstveni članek
Organizacija:BF - Biotehniška fakulteta
Status publikacije:Objavljeno
Različica publikacije:Objavljena publikacija
Leto izida:2025
Št. strani:22 str.
Številčenje:Vol. 15, iss. 18, [article no.] 9919
PID:20.500.12556/RUL-174673 Povezava se odpre v novem oknu
UDK:630*8
ISSN pri članku:2076-3417
DOI:doi.org/10.3390/app15189919 Povezava se odpre v novem oknu
COBISS.SI-ID:251588867 Povezava se odpre v novem oknu
Opomba:
Datum objave v RUL:08.10.2025
Število ogledov:137
Število prenosov:42
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
Objavi na:Bookmark and Share

Gradivo je del revije

Naslov:Applied sciences
Skrajšan naslov:Appl. sci.
Založnik:MDPI
ISSN:2076-3417
COBISS.SI-ID:522979353 Povezava se odpre v novem oknu

Licence

Licenca:CC BY-NC 4.0, Creative Commons Priznanje avtorstva-Nekomercialno 4.0 Mednarodna
Povezava:http://creativecommons.org/licenses/by-nc/4.0/deed.sl
Opis:Licenca Creative Commons, ki prepoveduje komercialno uporabo, vendar uporabniki ne rabijo upravljati materialnih avtorskih pravic na izpeljanih delih z enako licenco.

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:les iglavcev, venčasto porozen les, difuzno porozen les, peskanje, umetno sivenje, primarni profil, celotna višina profila

Projekti

Financer:ARIS - Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije
Številka projekta:P4-0015-2020
Naslov:Les in lignocelulozni kompoziti

Podobna dela

Podobna dela v RUL:
Podobna dela v drugih slovenskih zbirkah:

Nazaj